Search results for query: *

I recently aquired a turbo for about 40 dollars and it needs to be rebuilt, the kid took it APART AND NEVER MARKED THE SHAFT, so unfortunetly I have to get it balanced and rebuit, I am not sure what kind of turbo it is , my friend said it was a 14-B,he has had three conquest so i don't know what...

I was wondering before i start pulling things apart, can i use a 60mm f22 accord throttle body on my z6 intake manifold it looks like i can and should i use the z6 gasket or the accord gasket? I am looking for a few more cheap mods for good flow before boosting my car. And i have seen injector...

Is a 94 Ls throttle body able to bolt on to a z6 intake manifold and not throw codes on a mini-me

My friend Ryan has an extra ls motor and parts sitting around and offered to give me the throttle body off the engine for nothing and i said ok but i wanted to find out if i could run it on my car and not suffer any damage or throw any cells, The throttle body will be going on a z6 head with a...

Today at Autozone I saw a high output coil for a 92 civic ex dizzy for 60 bucks.And goes in the same spot as the stock one in the dizzy. suposedly Its like 15% stronger that stock. What the hell does that mean? better spark, more voltage ? i havent ever messed with my ignition. some kid who...

I was wondering if a p32 fuel rail(d16z6) is better than a fuel rail on a d25b7(i don't know what it is?) but im running a b7 one on my car and i am collecting pieces for a custom turbo and want to have good fuel ? I also plan on running a set of gsr injectors on it. The cars a mini-me b7/Z6.

I wanted to see if anyone here planed on going to the New England Dragway in Epping,NH. this weekend the 28 of may For this big car show theirs suposed to be a biniki contest to :worthy: But it will blow if it gets rained out. I want to run my car, and rain is the enemy....... :angry:

I traded a set of gay clear euro lights for my 4dr for a set of m3 mirrior and the prick didn't send me any hardware or any directions, I know I wouldn't need the directions anyway but the mirrior posts that go in the holes on the doors don't mark up so i need to drill holes or somthing, they...

I have a friend with some titanium double springs and retainers, i think their are for an ls ? maybe its an h22, i got to ask him today. He wants to sell them for like $75 and their brand new, i was wondering if they would ever work with a d16 head? I don't think they will but anyone have any...

I just got a d16z6 block for free and im positive its sezied, you can rebuild them right? How do you tell whats wrong and how to test for problems, like cracks and things. I want to find out if i can rip it down and build it up, from the ground up then swap out my old used b7 block. but i...

I have a mini-me, b7 block z6 head with about 10.6:1 cr. I want to rebuild all of my short block, pistons, rods, crank,timing belt, oil pump, etc. I would like to make it bullet proof. I am looking for suggestions about piston type, forged, stock?(I would like to keep it stock bore if...

I was looking at a racing crank pulley(50$) for my mini-me and i was wondering if its worth it , Then i was thinking to get the aem power pulleys and spend around 150-200 for the set of three of them. All the other places i anve found offer one pulley or all three(p/s,alt,crank) for 300 plus! ...

Does anyone know where i can get a steel short shift? I have broke 3 aluminum short shifters and im so sick of it. Its getting expensive and I can only find aluminum ones Does anyone know where I can get a steel short shift with a warranty or somthing or a steel one that wont break! It keeps...

I got into an argument with this kid about milling or resurfacing a head bef he told me milling you head and resurfacing it are the samething? I beg to differ. Milling bumps up compression, right? But resurfacing is just planing the head for a flat even surface, before assembly? Can anyone...

Is this turbo kit worth it, for a bolt on set up? $1800 The Greddy kit for 92 ex civic. The page says the kit has a fuel mang. sys ,and a cast manifold, so doesn't that mean i would still need an: intercooler setup and a blowoff valve, turbo timer etc. Or should i go custom kit Going to be a...

Looking for a MINT rear passenger side dr for a 92 4dr civic Anyone have one for sale ? Also i am looking for a pair of 'metal' z3 fenders for a good price And may be a carbon fiber hood Any help is apreciated

I want to swap out my built up ex motor for a b16 and i was wondering who has done it and what other then the motor,ecu,axles,and motor mounts, for this swap and what problems will i run into. the motor wqill be going in to a 92 4dr civic thanks

i was wondering if you could swap out distributors on a d15b7 head and have it work on a z6, my z6 distributor is messed up and throws a tdc code all the time but my girlfriend has a d15b7 that shes junking and it has a shiny brand new $200 distributor could it work on my mini-me set up?. i want...

I have been throughing a cel for a long time and i just heard that on my mini me set up you need your timing belt tooth, 1 tooth off so the tdc sensor doesn't throw a CEL is this true and what way is the tooth off towards the cab of the car or towards the bumper.? In every write up ive read ive...

I have recently replaced my intake manifold on my mini me and now i have a high pitched squeel coming from around the throttle body i think??? My car isn't running to great and i was wondering if anyone know what this noise could be and what is causing it? I have never heard this before its like...