Search results for query: *

OK I HAVE A ZC BOTTOM END THAT IS BURNING OIL BAD BUT HAVE A MINT Z6 BOTTOM END WILL THE ZC DOHC HEAD BOLT ON THE Z6 BLOCK AND WORK?

ok i have an 88 rex hf with a dohc zc that is burning oil bad .i cant find pistons for this engine but the bore and stroke for the 1.6 si is the same will theese pistons work in the dohc zc what about the rods are the the same?

i was told the only change putting a zc dohc into an 88 crx hf is the distributor wiring what is the difference and how do i wire it up and is this the only problem?

i'm doing a trans swap on my 88 rex hf need rid of that junk hf trans. i got a trans out of a 91 civic hatch but the shift knob and the emblems were missing.but i got the trans anyhow because it takes the bigger clutch but what model is yhis out of si dx or what.the model# on the trans reads...

wanted ps9 ecu and 92-95 vtec engine harness also dx or si 5spd crx trans

looking for good used hubs/spindles for 89-91 crx si/dx swapping out the hf ones please send price and location thanks.

looking for good used 89-91 civic/crx trans in good shape .please let me no price and location thanks

i'm doing a d16z6 swap in 88 rex i have read alot of info on this site about this swap but i have a few? should i use jdm vtec ecu w :worthy:wich is obd0 and convert this engine over to obdo?or should i get the ecu jumper and run a p28 and keep it obd1? does the jumper harness have the 4wire o2...

hi i have an 88 crx hf i want to swap in a better trans si trans are hard to find now but i have a 93 del sol scoupe trans. i no i have to change the hubs to dx or si for the axles to fit but where can i get a manual clutch to hydro conversion .this is also a d series trans to.

hi this is mike i'm new to the turbo thing i'm putting a t3 turbo external wastegate on a turbo header using 450cc injectors and a vortec 12:1 fmu on my d16 in a crx i have some small stupid questions where do you hook up the hose coming off of the blow off valve ? also the hose on the wastegate...

i was just wondering instead of wiring the vtec to the ecu can you use an rpm activated switch off of my msd6al ignition box because you can change rpm limits. please help im new to the vtec thing

I HAVE AN 88 CRX HF D15 BUT SWAPPING A D16Z6 I WANT TO BUILD LOW COST BUDGET TURBO JUST LOOKING FOR A LITTLE EXTRA HORSE POWER WANT BUILD CHEAP BUT ALSO WORKS RIGHT PLEASE HELP WHAT TURBO , MANIFOLD ,FMU, WASTEGATE ,BLOW OFF VALVE AND OTHER THINGS NEEDED TO COMPLETE THANKS

hi i want to swap a d16z6 into my 88 crx hf what is needed? can i use stock trans,motor mounts ecu what can i use of theese parts that i have now and what do i need to change how do you wire up the vtec thanks for any info

hi i got an 88 rex hf want to swap d15 sohc v tec OR THE D16Z6 in what is needed ecu and other things is this swap a good idea please help

my 88 rex died and i think is something with the ecu how do you tell if it is good and if it is getting power .the l :angry: ight doesnt come on and wich wires should have power?

my 88 rex quit running and i need to no if the ecu is getting power the fuses are all good igniter is good coil is good main relay is good the light on the ecu doesnt light up what wires have power or how do you find out if it is getting power? :angry:

blew my old engine put in a new one now no spark.changed coil and igniter and checked all connectors and grounds all good all fuses good also checked main relay i did notice the light in the ecu doesnt come on also tried 3 different ecus still no light please help any info im out of ideas :sad:

did a engine swap on my 88 crx hf took out the 62 horsepower hf engine and put in a d15b7 blew it up with nos now put hf engine back in now no spark checked wire connections crank angle sensor igniter main relay and fuses all good but no spark coming out of coil and no light on in the ecu when...

88 crx light does not come on in ecu and no spark also please help checked fuses and conections still no light tried 3 different ecus still no light or spark and checked main relay :sad: