Search results

  1. B

    Ctr Piston Comp Ratio In B16

    http://www.ff-squad.com/pistons.htm
  2. B

    Lsd And A Y1 Tranny

    It should work fine, I have a JDM YS1 tranny that came w/ LSD. it came geared similar to the Type-R tranny.
  3. B

    Itr Or Ctr Pistons

    I would definatly go with the CTR pistons. I believe that B18C rods don't need to be modified however B16 rods do need some modification. http://www.ff-squad.com/tech/pistons/B16%2...B17rodmod_1.jpg
  4. B

    Pistons

    Yes you can, I'm currently in the process of doing it right now, myself. You will need to modify your rods however. And don't get Eagle H-beam rods if you're going this route, b/c the CTR pins don't work correctly w/ these rods. just passing along some personnel experience. Here is a link to...
  5. B

    Typer Manifold Swap

    I tried to find one for a Delsol, NO where to be found. So I ended up geting a Hayami for a 99-00 SI. Hopefully it works out alright. 2 other nice features to it was, you could plug a guage right into it, and had a port for NOS. don't think I'll be doing any NOS soon w/ the high Compression.
  6. B

    Piston Upgrade B16a1

    http://ff-squad.com/pistons.htm Hope it helps.
  7. B

    First Car

    At 16 get the DelSol, if VTEC, your good to go w/ GSR swap bolt right in. also, w/ it being a 2 seater, you don't have to worry about the cockblocking friend, the girls all yours. now, if your looking for something to drag some of your friends around in the older preludes are nice, I also...
  8. B

    2001 Jdm Itr Rocker Arms On B16a1

    going a little off the subject I had a guy offer me a ITR head for $580. Is this a good price? I haven't done any head work on my B16A head yet...I already have ITR valves, springs, Skunk2 ratainers, brass valve guides (new uninstalled). I have CTR pistons, CTR Cams, and an ITR intake, now...
  9. B

    2001 Jdm Itr Rocker Arms On B16a1

    I just picked up ITR LOST MOTION ASSEMBLY (14820-P73-J01) for my B16A1 build up, now I want to know will the ITR rocker arm assembly fit on my B16A1 w/o any problems?
  10. B

    Typer Manifold Swap

    also, is there an good aftermarket throttle body that will easily bolt on to the ITR manifold?
  11. B

    Typer Manifold Swap

    I was thinking of getting new injectors anyways, what is recommended and where can I get a good set? do new ones come w/ injectors seals and o rings, and does it make any difference between OBD-0-1-2? since I'm running OBD-0.
  12. B

    4-1 Header 2 O2 Sensor 1 O2 Hole?

    Is there any special place this hole should be? on the stock manifold the 2 sensors are right by one another up top, now on the 4-1 header the hole is all the way by the bottom. do I just cap that off and tap 2 holes in similar places like on the stock manifold? thanks again.
  13. B

    Typer Manifold Swap

    Thanks for the detailed help. So, I'll be using an after market fuel pressure regulator and tee it off, cap off the one vaccum line, and finaly All I'm going to need is an after market (ie. AEM fuel rail) and everything else should be good to go. If I'm wrong anywhere please let me know...
  14. B

    4-1 Header 2 O2 Sensor 1 O2 Hole?

    Need help, my friend gave me a 4-1 header used in his VTEC DelSol, it only has 1 o2 sensor hole, my JDM B16A has 2 o2 sensors, is there a way that I can still use this header, (ie. drill another hole) or if by not using one of the sensors will the engine run poorly b/c of the poor computer...
  15. B

    Typer Manifold Swap

    also, I'm running CTR cams, and .25 pistons, 4-1 headers will I need a bigger throttle body if so which is best? hopefully this also helps w/ fuel injector sizing.
  16. B

    Typer Manifold Swap

    I'm putting a Type-R manifold on my B16A swap I just got, can you give me more info on exactly what I'm going to need for this job? like what fuel injectors, (B/c if I go w/ the newer fuel rail like stated below aren't the fuel injectors OBD1-2 sensitive where I'll be running OBD0) also what...
  17. B

    Piston/Rod Question

    so which is it? do I need to remove 1mm of material b/c I'm using Eagle H-beam rods, or would it run with stock pistons no mod?
  18. B

    Piston/Rod Question

    I've got a question about CTR pistons. I'm in the process of working on a B16A and I have Eagle Rods, and CTR pistons, I've heard somewhere about having to do a rod-mod? anybody know anything about this?
  19. B

    97 GSR swap 4 sale

    :D ends today. Last chance.
  20. B

    97 GSR swap 4 sale

    Check it out. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=1876414512
  21. Try your Search on Google

Back
Top