Search results for query: *

NOT new to Honda's but mostly the 'older' stuff.. Just picked up a CR-V for my Youngest son and rebuilt the trans with a 'supposed' better clutch's and a Trans-go flow improver kit, external cooler and a cheap header. Going to re-route the end of the pipe around the little transfer case and...

I've had these for about 17yrs and don't think that I'll use them, and need more room in my shop. If I can remember correctly, they came off an older 1g prelude and found some Ebay 13" BFG's for them. I'd say that they only had about 2500 miles on them. Still got the little 'tits' on the...

Looking for an old header if someones got one laying around. Don't mind if it's 'slightly' beat up or scraped. Just need something better til I get my B-series swap going. I'm Just under Memphis, TN. Thanks E

Just like it states.. Looking for B-series swap mounts to put my GSR engine/trans into my '84 civic S. I've probably got all the other parts needed, so I'm just looking for the mounts right now. Please post pics and part numbers/packages of your items. Just under Memphis, tn Thanks

I'm picking it up for the wiring, suspension, air cond and drivetrain to go into my 78 civic trunk model. If you are looking for easy to ship parts, give me a PM since I don't get on here all too much. I DON'T have it at the home yet but it should be here in the next week or so. It's white...

Got a (long term project) 89 CRX that I did the teg 4wheel disc conversion and thought that I read somewhere that one has to use the teg E-brake cables. Well, they're about 1.5ft too long.:huh: Do I need to find some 90-91 crx cables that had factory discs? Off to Rockauto.. E

Hey, I've got all these parts laying around and now that I picked up this a6 for a z6 'mini-me', I started diggin. I found a set of used a1 rod assemblies and MAN are the teg rods thicker! (I'll try and get some pics posted) but til then the center channel looks slightly deeper and the "Y"...

Hey, Just scored a a6 short block and si tranny that can replace my tired D15B. SO, i've had this HF engine sitting for about 3yrs and wanted to know if the head from it could be used without raising the compression or having too small of valves. I already have a harness, dizzy and intake...

Just throwing a feeler out there. I'm thinking of building a A6 for my 4dr. Just for a bump in hp and still good mileage. I've got some B engines but I'd really just want to be able to swap it out in a day or so, and NOT have to mess with heavy wiring and mounts.. The 'yards' here are full of...

I seem to have misplaced my Hood latch that connects to the to that thin header panel in front of the radiator, over the condenser. And then down to that thin strip that attaches to the front crossmember valance. (You know, the part that the cable goes to) Shipping would be to 38654, NW...

Wasn't exactly sure where to ask this but, for the ones that have successfully done a rwd hybrid, Can the later 93+ prelude drivetrain be shifted (by cables of course) from a shifter in a pretty much stock position? (SO, the shifter and cables would route from the rear/side back up to where a...

OK, kindof a ongoing 'challenge' with this 88 civ (4dr auto). Got the CAS and injection codes fixed, but now a new one arises that I DIDn'T have before..! 14-EAC valve. already installed another engine harness searching for the previous solutions and this is throwing me. I've gone through 3...

I've got a major problem going on with a 88 civc auto 4dr. Had it sold and the new owner was driving me back from the test drive, and it started to sputter and died right in my driveway..:confused: Had to give the money back (just on moral principle) and have tried all sorts of things...

Started a teardown and build of my L3 and can't seem to locate these particular gears. SO, if you can assist in this quest, by all means PM me.. Thanks E

I don't see myself getting any more 1200's any time soon, so if you are in need of parts PM me.. I've got some rare stuff and some that's getting rare. From engines and trannys to body parts (over 30yrs of stuff) YOU tell me what you are looking for and I'll get the pictures to you. I'm busy...

Good morning. I've read tons on the "dual port" injection conversion but haven't read much of anything IF the crx "HF" engine wiring is plug and play with the stock LS/DA 90-93 integra wiring since the HF is multi port injection already.. So, Can I just plug in a Integra PR-4 ecu or...

Hey, haven't been here in a long while but just happened to be at a yard that doesn't really have that many imports and i see a white del all the way in the back. He doesn't want all that much for it but says it was a tow-away that the P/O never came back for. I can get bonded titles here, so...

Pretty much like what it reads.. Does anyone have that book "How to rebuild the Honda B-series Engine" BOOK that they've read and are done with that they wouldn't mind selling to a fellow B builder..? I've built dozens of older engines but don't need to 'experiment' with these next Vtec...

I wasn't sure where to post this, swapping or suspension. SO here I is.. I picked up a GSR for the suspension for a 89 hf and just happen to set the front forks side by side and gosh-golley, they looked dang near the same! That got the ol rock rollin and thought that if they were too big to...

Yeah I know its not a Honda.. I got this a while back from a friends wife who was selling off things after He passed away. It's been rebuilt and in Plastic for probably 7yrs. Image shack is acting goofy so I'll try and post it in my album Sorry. $500 Oh I'm in Mississippi...