Search results for query: *

Just dropped obd1 gsr into obd2 integra ls. used obd1 ecu with converter harness. have never used car bought as a shell. engine will not spin over. clicks in dash when key is rotated but starter will not engage or even click. also something funny about dash lights. all engine lights like oil and...

Bought a 1993 civic ex automatic with a blown engine. Rebuilt the engine and it runs fine until held full throttle.It opens up and sounds like vtec is there but then it just shuts down.I can hold it to floor when it does this and it will shut completely down. However let off the gas pedal just a...

Anyone know of aftermarket weatherstiping for crx's. I need new trunk strips and seals to go around the sunroof. Hope to find it cheaper than orignal honda stuff. Also can you buy a pop up sunroof that will fit in the si hole??. Thanks

Hey, I have a 1990 crx si d1.6 . The dizzy locked up I mean cooked. (its a wonder the car didn't burn) The car is off the road sitting right now so I don't want to put money in it..($170.00 @ advance)Plus I have a b18a1 to put in it later. However I would like to crank it ocasonally.I was told...

I know this sounds stupid butt!! Dizzy in 1990 crx si locked up. new one is $160.00 but I aim to swap motor soon anyway. I have a 1989(still obd0) dx dizzy that is good but the plug is different. can i wire it in just to use save the 160.00 for later. looks like it has one less wire than the si .

Have a stock 1990 crx si that is eye burning rich. Its not codeing but is sooting the back bumper. Changed the o2 sensor so whats next. Mechanic said to look for vacum leaks???

have a 1990 crx si bone stock. It runs rich but does not code. leaves black soot on the bumper and burns your eyes. I have tuned it up with plugs and such. Funny but it runs great don't skip or nothing just really rich. Could the o2 be bad but still not code???

working on a b18c1 (gsr) in a 1993 cx hatch. Ordered a new del sol shift linkage from inline four and its about 3 inchs to long. They say it will work on all b swaps in a civic. This is the second one I have tried. The other came from raceparts.com (I think) The shift part was to long but the...

A friend wants me to put a engine in a 1991 prelude si. It had a 2.1 but all he can find are 2.0. He just wants it running don't care what engine it has. Will the 2.0 bolt in where the 2.1 was without to many problems? Also will the b21 trans work in a gsr swap in a 1991 hatch?

Have a 90 crx si that the back of the sunroof sits to low when shut. It exposes a crack and leaks awfull when it rains. I think it needs new lines pulled from the pan because I have blown them out and it still leaks inside the rails (follows my antenna wire and drips on the pedals.)(also drips...

Cracked the case on my 91 crx d series si trans and found out the shifting fork is broken and a bearing is bad. I have d series trans out of a 92 hatch that is toast will the shifting fork out of it work. I know the outside is different and its mounts are not the same. Are they all the same on...

This is the # on the front L3 1389811. Its a good trans but if its not si I hate to put it in place of one that is.

Bought a 1991 crx si last week. Guy said the cluch was out of it. After driving it I thought maybe the trans was bad also. Think it has a bad bearing but my hayes manule don't get into spliting trans cases. Anyone got a printout for takeing trans apart? I have another trans in a dx crx whats the...

I have a 1989 crx dx with duel point injection. Going to put a d16 out of a 1988 si in it. Will the horsepower difference between the intake manifolds be worth the wiring problems. Want it to run to its potential but face facts its still a d-series and I'm really just in it for the gas milage...

Have a spoon chipped p72 ecu bought off ebay that codes a 21 vtec solinoid. Pulled it out and put a buddys stock b16a (p30 I think) in it and its fine. Checked the wire and its fine to the ecu. Jumped 12v to the solinoid and it clicked. Is the soliniod wire on the p72 in the same A4 slot as any...

Thanks to all who helped with the last one here we go again. Got the o2 wired and cleared the ecu and now I have a code 21 vtec solinoid.The wire I ran to the ecu is good (ohms out and no shorts) and is in the A4 slot. The solinoid clicks when I throw 12v to it so why am I coding? Will this swap...

run the wires from the o2 to the ecu. Now when I looked at the chart to see where to plug in o2 sensor ground D22,12v power A25, and heater control A6 there are already wires in the plug. Was this car even thougth its a one wire still wired at the ecu for the four wire system? Should I just...

Hey, How can I check the fuel pump on my 1989 crx dx. Its not running when the switch is on but I have no head lights either. Are the two problems related? where can I check for juice to the pump short of pulling out the tank? Also where is the head light relay. Thanks

b18c1 out of 1997 teg in a 1992 hatch. What type injectors should I have? It has 330cc venom's in it. When its cold it don't take nothing to flood it. The gsr was obd2 orginal but now is obd1 in the hatch. Will the injectors out of the d work in the b? or are they to small cc?

Does the vtec oil presure sensor in some b18c1's go in the back of the head and in the solinod of others. I have a hole in the head next to the dizzy pumping oil but my sensor is in the solinod. Do I need to plug the one in the back of the head.