Search results

  1. L

    Condinsation inside headlight

    Does anyone know how to get condensation out of a headlight? I noticed that since I got my car outta the shop its been in there and its making my left headlight a lil dimmer. Thanks
  2. L

    Blinkers on a 4th Gen Lude

    Does anyone know for a fact if the side markers on the front bumper (next to the blinkers not the headlights) flash when you turn the blinker on? I'm trying to set my sidemarker by the headlight up as my blinker but I don't have my car for the time being. Thanks
  3. L

    Know of Any Good Shops???

    Spun a bearing in my H22 and need to drop another one in, don't have the time to do it my self. N E One know of any good shops around Sac or up the hill towards Placerville? Thanks
  4. L

    Eyebrows???

    I'm looking for a set of "Eyebrows" for my 93 (4th gen) Lude. I want something that I can either cover the light completely with cutouts for the actual light or something that just covers the top. The kicker is I want it to be the same color as my car. N E Help is appreciated. Thanks, lude
  5. L

    Extreme Front Bumper

    Ok, I am wondering if you for sure have to cut the bumper support to put an Extreme front bumper on a 93 Prelude. I've heard different things but I need to know for sure. Thanks, lude
  6. L

    Firestone Firehawk GTA 02

    I'm lookin to get a set of 205 50 16's for my 93 lude. Has anyone run the Firestone Firehawks? If so, how did you like them, how where they in rain, how was the wear? Thanks, J
  7. L

    Fs 1993 Prelude Vtec

    I'm selling my '93 Prelude Vtec. I really don't want to but I must. It has a JDM H22 with less than 52,000 mile, new tranny with less than 52,000 miles, avg mpg = 26-28, new timing belt, viper security system, MB quart components, MB quart 4x6, crossed drilled/slotted rotors with axxis...
  8. L

    Clutch For My Swap

    I was just wondering, I know an F22 clutch will fit the H22 tranny, but will it work vise versa. I honestly don't think it would make a difference but I thought I'd ask around. Thanks
  9. L

    Prelude S Tranny

    K, here's the deal. I just within the last 3 months spun a bearing in my USDM H22A1. So I went ahead and put in a JDM H22A and figured while I was at it I might as well put in a new tranny too. I had in the months before been researching the SI tranny as well as the S tranny, comparing them...
  10. L

    Knocking On My 4th Gen Lude

    K, whenever I go over bumps in the road, I live in California sso its everyday, I hear something knocking in the rear of my car. I know my shocks aren't blown, but I know the sounds coming from around the upper shock mount. N E ideas? Thanks
  11. L

    Fs: H22a1

    I have an H22A1 that has a spun bearing. But, the Cams are still in the head, the head was just recently tested for warping and cracks and passed. After I spun the bearing I had the engine replaced with an H22A. I'm asking $450 but I am willing to negotiate. Questions or comments please...
  12. L

    Keeping Rotors Clean

    I'm finally getting a set of rims for my car that will show off my rotors. Unfortunatly there is some rust on the surfaces that don't get touched by the pads. 1. How do I get this off? 2. How do I keep it off? TIA, J
  13. L

    Help

    Ok, tonight I was playin around in my car, I just had a JDM H22 and SI tranny put in it, and when I was going through the gears on the freeway they felt mushy. It feels like there is a rubber gasket between the stick and the actual gear that squishs when I force the car into gear. It did it...
  14. L

    Update!

    U may recall me asking opinions on putting an SI tranny on a JDM H22 in my 93 lude. Well, she's done. And the end result. In my opinion, I think it was a good choice. Now if I were keeping the USDM H22, I would not have done it. But I think the extra horse and torque does a pretty good job...
  15. L

    How The Hell?

    K, I'm wondering how in the worl I would install my Infiniti 6 1/2's in my Lude. When I went to do it the first time, I realized that Honda used a 3 screw pattern and the screw pattern on my Infiniti's is 4 screws. How can I get these speakers in? NE one know? Is there a kit or something I...
  16. L

    Engine And Tranny Match Up

    K, I spun a bearing in my H22A1 so I'm putting a JDM H22A in and I want taller gears so would I be able to put a Prelude SI Tranny in it. I just want to make sure they'll bolt up before I get the tranny. TIA J
  17. L

    Suggestions on Head work

    Saturday night, a friend and I were out cruzing when my car started to warm up. For those of you that have 4th gen ludes, the gauge went upto 4 bars for about 30 seconds, then dropped back to 3 bars and evetually 2 again. I found the closest gas station and put water in it. I figured I'd...
  18. L

    Type S Pistons in my stock H22A1

    Ok, I have a 93' Vtec lude with a H22A1 and I'm looking into putting type S pistons in it. What parts will I need in order to do this. Also, will it still pass smog in California? I was reading another post on this topic and it was talking about the cylinders being labeled with either a B or an...
  19. L

    Painting Break Calipers

    Ok, I wanna paint my break calipers but I'm undecided on the type of paint I should use. I know I want the color to be neon green but that color doesn't come in high temp paint. Will I need high temp paint? Or should the regular paint be ok? tia, J
  20. L

    86ing Body Roll

    U know, for as fast and as low as the 4th gen preludes are, they sure don't handle. NE one know of some cheap mods to reduce body roll? I've been looking into getting a Neuspeed Front Strut Tie bar (I here they do a lot more than the single bars made by Matrix and such), as well as anti roll...
  21. Try your Search on Google

Back
Top