Search results for query: *

Zex is having a special on their website, $149 for their lightweight flywheel... not bad since they used to be around $300

Yes there is a damn line forming, and to think, last month zero interest in the springs. Like I said in the emails, give me a day or so to borrow a digital camera and pics will be sent out... 94civicslow, you have first pick since I posted in your post.

I have a spare set of B18B crower valve springs and retainers in my garage, they are even still in the box. I was building a second ls engine for the gf's car but now we have gone lsvtec. If you want them i'll do $250 shipped thats just over $100 less than what they cost me. Reciept (or copy...

If I remember correctly, the ls rods use the 8mm bolts and the gsr and type R rods use the 9mm (one of the reasons the ls rod bolts are the main weak point) I cant seem to find the reciept so can anyone confirm that it's the 8mm ones

I have both the V600 and the Nokia 5100... both are unlocked, I just trade sim cards between phones depending if im doing sales or service. For an extremely durable phone with basic features, i like the nokia 5100... waterproof, shock proof, fallen 4 stories off a roof and not even turned off...

cam specs: http://www.crower.com/cat/import/honda/camshafts.shtml

Coles version: On my existing build I am running crower 403's with nitrous... I was wondering if I would see a gain in power if I were to run the 402-T's Detailed: I was at a small local meet on sunday and one of the guys there offered me a trade, my crower 403's for his 402-t's since he isn't...

Hence the reason im posting here... I didn't think the mount through properly, I know that the larger combustion chamber will lower my compression down to 10.1:1 but I didn't take into consideration the difference the lip would make plus the fact that I would have to use a P8R head gasket...

Well after some research, I have found that this is a very rare jdm (and I guess aussi too) b20 head with an 84mm quench area and 33mm intake valves just like a vtec head. It is supposed to flow better than a ported B18a/b and a little better than a pr3 head. Now is it for certain that this...

I had this happen on my old accord, it turned out that the rear disk was warped

Well, if you are interested, I found a set of Toda B's with matching valvesprings (not sure about the retainers) for $700cdn (approx 558.21usd) on revscene.net . http://www.revscene.net/forums/showthread....threadid=243089 The seller has a +rating of four which is pretty good (check buyerseller...

Imo, b18b shortblock, use your existing pistons if they are salvagable (with new rings obviously), if not, some p30 or ctr pistons. Also, have the rods shotpeened and the rod bolts and head bolts replaced with arp's. Cheap and effective, almost the same price as just a teardown and rebuild of...

I have come accross a p8r head off of an aussi b20b engine... the block was used in a crvtec and I picked up the head as a spare; this head seems to have a larger quench area (measured 83mm) and larger valves than the stock ls head I have. I cant find any information on this head so does anyone...

For master cylinder sizes and part #s check here: http://www.honda-tech.com/zerothread?id=928201 For proportioning valve sizes (you want 40/40 imo) and part #s check here: http://www.honda-tech.com/zerothread?id=931185 Imo, it would proabably be easiest for you if you were to get a complete...

ok, thanks... i'll give it a try, worst case senerio is that i'll have to fabricate a mounting bracket for the cable

anyone?

Nope, neither site has a listing of the diameters... or at least I didn't see it, I am trying to find out which car had the biggest rear disks stock with the 4x100 pattern or the 4x114 pattern ( I can always drill )

ok, the rear swap I have aquired is 93 delsol trailing arms with 94 gsr disks and calipers... my question is, will the gsr ebrake lines work on a 97 hatch or will I need civic ones, if so what year and car model would be appropriate?

Hey, im looking for a listing of all honda brake diameters... I went to the old brembo site I used to use but it's gone now and I need to check some diameters of my brake upgrade Anyone know of any other sites that have a chart of honda brake diameters?

No they won't... I tried... The springs will fit in some heads but not in others (depending on how they bored the spring walls, I have one 95 head that they wouldn't fit in, rubbed on the wall, and one 98 head that they would). The other problem is the retainers, you can't use the stock ls...