I replaced my transmission on my wife's Integra over the weekend and am having issues with the kickdown cable that attaches to the trans and then to the throttle body. The old wire was stretched and the guy who sold me the rebuilt trans stretched the one for that. Now he gave me another one last...
Yes, I searched high and low before making a post.
I just got this EF in a trade for my beater, the motor was rebuilt and for some reason has a GSR head. I just finished classes for the summer semester of college so I now have time after work to mess with this.
The car does run, I popped the...
I was wondering if anyone has seen or put some wire wheels on a DA? Pics please!!!My friend & I were working on my swap last night in my 93 GS when we were joking around about the idea of slamming my car on some 16 inch 100 spokes. But now I'm curious to see what it looks like.
Name: SomaliaContact: PM MEJDM LS SWAP from my DA Approx: 35-40kWhole swap for EF/CRX 1200ENGINE:500 OBOTranny:350OBO No grindsTrades Quality turbo stuff, I need a manifold, wastegate, & turbo.Or DA parts.you can check my trade rating on vadriven sn: somalia
This is going to be a crazy question: Can the struts & springs from an ef bolt up to the DA?The reason I'm asking is because the suspension on my ef has like barely 10K & I just picked up this Unmodified DA & I just would hate to lose my suspension setup because I haven't had it that long & I...
I am removing my b18B1 out of my DA & pulling my LS/VTEC out of my EF & putting it into my DA.I know this is a pretty straight forward affair. My main concerns are wiring up VTEC. I have no idea what to do to wire it up on the DA .I am using the same ecu that I tuned it on. But do I have to...
Okay so basically I have a LS/VTEC hatch that I want to turbo and I have several questions before I go out and turbo this thing and blow it up. I will give as much information as possible to help everyone out.My set up as follows so far: on about 25-30K (I was going to replace asll the gaskets...
I have a ls/vtec and I'm building another block for boost.
So far I have a kms crank girdle ls crank/ acl race bearings/ gsr oil pickup / oil pump / oil pan. I'm going with eagle h beam rods.
But for the pistons I was thinking of going with a 10:1 ratio.is that too high?
I'm using a...
I have a ls/vtec that was balanced and blue printed, with oversized b16 pistons and bored out a tad to make it 1.9L.
The head was not rebuilt from the looks of the seals. I noticed a leak in the vtec silenoid gasket and the cam seals are seeping a bit. My question is since the motor has 15K on...
Long story short I traded my car with a guy on vadriven.com and only had the car a month and the tranny is jacked up so I am looking for one asap.
B16 or gsr cable tranny only. im located in va beach 23456
I have to replace the pgm relay under the dash and I don't have a Manual. Does anyone know where its located under the steering column? I have a 91 civic hatch dx with a ls vtec. Also does anyone know how many prongs are on thud one for my car I need to know so I can get the part after work so...
Okay so I got the oil changed and took the car home.
Then later that night I hit VTEC and get a cel after the transition so I get off it and stop shut he car off and try to restart and it would turn but not fire. Then I waited a minute let it sit and it started and no cel.
My friend saw a...
Okay I have a LS/VTEC thats balanced and blue printed and bored out to 1.9L (oversized B16 pistons) and a fully built B16 head with gsr cams. Everything was converted to obd1. Its ran on a P28 ecu with crome. I was told that its just a b20 base map on the ecu & that the safc 2 was used to tune...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.