Search results for query: *

hey guys, i just got my first crx last week, and have been fixing some issues all week, and now that its running like it should and the suspension is stable, and drives good, im trying to decide if i wanna go all motor or boost it. im on a pretty low budget so im leaning towards boosting it...

try bleeding the coolant system, since u already flushed it, could be some air left in it...there is a bleeder valve next to where the upper radiator hose connects to the motor, and a little valve pointing up. with the car running, loosen the valve just a little, enough for coolant to squirt out...

just try swapping out you vtec, the solenoid and all, its only a few bolts, 10mm i think, holding it to the head... any obd1 vtec should swap right in..if that doesnt work, maybe check your oil pump, pickup may be clogged, i mean it can be alot of things. check your nil line for the vtec and...

id say its in the wiring. bring it to me, ill fix ya right up and you can be on your way, cel free and rev happy ;) for a price of course lol

how is the car running with code 3? does it run better/worse than before u started? also, when my map went bad, i was thrown into limp mode...so shouldnt urs be?i had a z6, not b16..but it shouldnt make a difference, ,if ur map is bad u shouldnt be able to rev over 3k

main relay..seems like evryones is fucking up all of a sudden, so check it before u spend more $ on un needed things. also, run a compression nd leakdown test to make sure u have comp. u should have somewhere between 160-200 psi in all, and the numbers dont all have to be the same, a few...

no no no...if u wanna save money, PVC pipe FTW! i used it on my teg build, painted it red, ans it worked perfect, seemed to keep the charge cool too. not one problem in 2 yrs so far, its still goin, owned by my brother now though. it has a 16g evo dsm turbo, Ram horn, rc550's, tuned on hondata...

no way would i have paid over $200 for that buddy, i hope thats what u paid, or less. thats a good sign that the owner doesnt maintain his car or engine, its carelessly slapped together, dont expect alot of life outta it unless u plan to rebuild...but to each his own

id say its too long...i think u should try em1 axles...or at least half shaft. hey prelude guy...how is ur car driveable with no half shaft? i dont see it?

when u are having the problems ur having now! not to sound like a smartass

id almost bet $100 that ur knock sensor on the back of the block came unplugged, broke off, or is defective. thats more than likely it....

its a obd1 motor and ecu in a obd2 car, thats why u have the jumper harness. id say its the factory si harness in ur car since its done that way...

check your slave cyl

ypu need to use the h22 motor mounts, wiring harness for the engine, ecu, shift linkage and axles, and motor/trans, and i think you need a obd0 to obd2 conversion harness and a cable to hydro conversion for the trans. its alot of work really

look at my history of the threads ive posted, ive always offered help to people, and help includes offering them parts they may need. how is that ill advised when most ppl on here ignore some peoples posts. im just trying to help the fella out. i havent posted any ill advice so why are you...

u need the pr4. i think the pm6 is a b16 vtec ecu

do it! i like the dohc d16 motors in the tegs, they are basically a dohc zc motor, and people put those in your chassis all the time, so why not do it? lol as a matter of fact, didnt jdm crx's come factory with zc's in them from japan?

check your vaccum hoses for leaks and flush/bleed your coolant and radiator, replace thermostat, clean/replace fitv under throttle body with a known good one, mayb try replacing the iacv with a good one too.

yea the d16a1 will drop right in, u just need the axles and ecu, wiring harness, and dizzy, mounts, and shift linkage. i have the pg7 ecu for the d16a1, so pm me if you end up going that route and need it. if you dont want the a1, i have a buddy with a full mini me vtec swap for $650 with...

hey let me know when you figure out what the problem is, im sorta having the same situation...and it sucks i know. i think its my tranny though instead of a axle, i was told the differential, imout shaft, or halfshaft was bad. my car wont move in forward gears unless i ride the clutch or keep my...