Search results for query: *

can anyone tell me where the four wires on an obd1 b16 should go. I just need to know based on the plug, like which wire goes to what ecu pinout. hard to explain, but i need to add all four wires to an obd0 converted car, and the sensors themselves (denso and bosch for sure) have different...

i just installed an obd1 b16a into my CRX. while the motor was out, i replaced the timing belt and water pump. the arrow on the oil pump lined up perfectly with the line on the crank gear while the two dots on the cam gears also lined up. i turned the engine over a few times then verified all...

I've got a Mini-me project with a d16z6 head going on a d16a6 block. I want to rebuild while it's out of the car, and plan on going with one of the kits, as they are much cheaper than piecing together everything needed. So my question is, will a kit designed for the z6 work on the a6? water...

I'm having a bit of trouble deciding on pistons for my LS/VTEC build, and was wondering why the calculators at Honda B-Series Compression Calculator by ZealAutowerks and Compression Calculator - Honda, Acura Tech Website, tutorials, tuning and HOW-TO's. Drag racing, street racing, road racing -...

So I went to check out a "YS1 LSD" trans, and upon looking in the axle hole, I seen something odd. I've never seen a LSD like this before, but the guy swears it's an OEM LSD. Maybe the early cable trans had these? you can see through to the other side, although it's through a small hole, rather...

I'm looking to sell a 1990 CRX Si trans (large spline, as opposed to the 88-89 small spline. earlier motors can use this trans with the 90 clutch disc) no grinds, no whining (has sat for awhile, will need new axle seals.) the two reverse light connectors have been cut off, but still plenty of...

does anyone in Arizona know of a good honda tuner that will work with an obd0 b16? it's been a long time since i've needed to have an ecu cracked and i'm sure i want to stick with obd0 before anyone tells me to go obd1. any suggestions will be appreciated.

does anyone know what sensor is considered the "primary" and which is the "secondary"? i need to know which sensor the ecu wants in merge 1-4 and which should be at the 2-3 merge. i know i seen a picture on here once before detailing just that, but i cant find it.

the vehicle in question is a 89 CRX Si. during the summer months if the car had more than half a tank of gas, when parked in the sun, fuel would pour out of the filler neck. i would go in to work, and come out to find gas flowing down the side of my car, sitting on top of a puddle of gas the...

So i'm in the market for a new battery for my rex, and have been looking into the PC680MJT by odyssey. but the problem is, i live in phoenix... where it regularly gets hotter than 115degrees. has anyone owned a 680 in such temperatures? would i be better off getting an optima battery? the car...

on the D, directly to the left of the oil filter and oil pressure switch, there's another plug, it had a large boot over it, and two single plugs that clip on it. is this the fan switch? if so, I need to lengthen it to reach the switch on the B. I can host a picture of it later if no one knows...

can anyone tell me, or show me a picture of, how the steering rack is connected to the steering shaft that comes down through the firewall. there is no access to the top of the rack, and it doesn't simply pull down off of the shaft. the CRX is a 89 Si.

Looking for an OBD0 b16 exhaust manifold, the one with two O2 sensors, one in each of the primaries after their first merge. + cost to ship it to 85037. thanks, Andreas

So my problem (for now, i'll have plenty more later) is with the exhaust manifold on my obd0 b16 swap. the swap was in some guys civic before he wrecked it. the exhaust manifold he gave me with the swap is the one with the O2 sensor near the cat, not the two in the manifold like the obd0 should...