Search results for query: *

Hey guys i have a F22B1 swap collecting dust and i been looking into the G23 build, i see people comparing it to the K20. I just want to know some cons and pros on this build i really cant find any good info about the swap, no one talks about trannys and the H2B swap is just to costly i cant see...

Hey guys i just bough a 91 B17 gsr integra for 700 buck, astec green. It was hit in the back and is fixable but car needs to be redone with paint ect.. its pretty rough. I was thinking about parting the car out and a friend offered to trade me a B18B worth $400 a Gsr head with 2 bent valves need...

Did a z6 swap in my ef, Im running with no codes till i rev up to 5500 and hit fuel cut off. It throws a code 16 and puts my car in limp mode.. if i reset the ecu and drive the car again it will be fine unless i get around 5k rpm. I put new injectors in them and did wiring check i get .4-.8...

I was searching on google for a write up on tmic in civic and ran across this. Some guy took a rusty eg body and put it on a wrx chassis. Not the first AWD civic but its the best awd civic.. Project: First world Civic powered by Subaru - Honda-Tech

I have a BA8 sitting around with a good title just a bad front end, its pretty much a bare frame with just shock towers. all the sheet metal was bad from a crash, So its a perfect project car to do a J35 swap. I have been looking for a write up on this and i come up with nothing.. only info i...

Ok 89 EF, 94 D15B7 has the right ecu.. When i start the car no CEL's when you get moving it will rev cut at 3-3500 rpm than a code 16 comes up.. Well great.. when i did the swap i wired the injectors, camgear A1 cyl1 A3 cyl 2 A5 cyl3 A2 cyl4 dissy, and (voltwire A25) i spliced into the voltage...

This is just a idea, I was looking at a SBC single turbo setup and they use the same headers ( block hugers ) for turbo or N/a. Honda stock header or a 2 piece header is about the same. If you made something up with stainless piping could you mount a turbo elsewhere?

Have a dx just trying to get power windows/locks/mirror working right. I have the window switch but no plugs.. Where in the world would i go about buying plugs for the window switch? Any way around this? Will 92-95 plugs with 96-00 switch panel? Any window switch the same from a integra/civic...

I robbed a 1st gen subaru legacy AWD turbo, cant find any info on it i have googled myself mad trust me. First off can i even use this turbo... i cant find a 3 bolt manifold or any T3 to 3 bolt adapter. pics of turbo. http://img168.imageshack.us/img168/8975/sl380573.jpg...

Just ran across this one night looking at diy stuff. This guy used tb's off a 600rr.. DIY itb serie d - MONTREALRACING This guy used some gsxr tb's look at how he made the TPS work.. HM-ITB This is a nice set up for the money ITB and head work makes for a fun honda.

Im making this post for every one out there trying to be the fastest honda on the block, You wont do it and you cant. I learned this lesson after looking back at what i put into my Ek over the years... I bought the car with 56k miles in 00, its now 12 years old and you cant find one in a junk...

Ok im looking to sell my EF but i dont no what to ask for it. It was just painted at my friends shop, champ white I did a lil firewall shave and wire tuck i guess that counts for bling? I never seen a Ef that looked as good :). But it has a Pl3 9000 Si tranny, D16Z6 obd1 swap stock head, High...

Been getting my dx ready for paint and a firewall shave, I used aircraft striper and i do regret it i should have just sanded it with 180.. If you look at the pics you can see where the striper did not work. Im doing the brake lines tomorrow and installing a inline fuel filter. I did the wire...

I have some trailing arms off a 96 Teg but the car its off had ABS and my Dx is non abs, will i have to replace any thing for this to work ( calipers ext) any other parts i need to be aware of like LCM? Having a hell of a time finding a stright up answer. I have 99 si ebrake cables, 40/40 Prop...

Any one know off hand how much i can get for fully striping a 2000 teg? Interior and outside is in great shape. motor is shot but the block is fine. Tranny is still good.

http://www.youtube.com/watch?v=0qmwj043uyk came across this vid on D-s fourm, People were going off about his 2step or something. Just cant get over how ugly it is, and that wing on the back is for high speed's yo. My question is how did this dude hold 5th boost for that long without doing...

Im looking to swap my D15B block with a D16Z6 block to help lower c/r and the extra .1L. Can i do this with just the z6 crank and block or must i swap more stuff on the head? Like cam gear and belt, and im running P28. The rods and pistons im using are vitara and H-beam, waiting to install those.

Can any one tell me the max psi on vitara pistons and race boy rod set up? Im looking to run about 15+ psi. Before this i had 7psi on stock internals and ran chrome, think this time my set up will be s300, 15g turbo (volvo or dsm) and DSM 450cc injectors. The big deal about the turbo to me is...

Been putting some thought into CF, I have a oem CF hood at the moment (98 ek). I was thinking of getting CF doors and a trunk, Is it worth the 1500 for doors and 500 for trunk? Iam looking to shed weight here, looks dont make speed..

Just looking for advice. Ok, iam not happy with my gray ek interior, I would like to get a jdm interior set for 1000$ off ebay but for one... What is the differance with Jdm ek and usdm interior? As in fabric differance ect. Would any one spend 1000$ on the set, is it worth the 1000$ 2nt...