Search results

  1. c-rex-beat

    z6 idle high untill warm

    Can't figure this out. Why does my z6 idle at 2500 and decrease as temp climbs. Usually takes about 5 minutes. All my other cars idle at about 1200 untill warm. Thanks guys.
  2. c-rex-beat

    z6 into ek

    a buddy brought me his ek with spun bearings. I have a z6 I will let him have but I'm not sure about knock sensor. We will be using 2b ecu. Shouldn't be any other issues right? How do I go about knock sensor?
  3. c-rex-beat

    wrecked eg in need of parts

    Hey guys, I just got a wrecked eg from a buddy. It was hit on the front\driver corner. He let someone test drive it and made it 3ft out the driveway then SLAM, he bought it! now I gotta get lca's, knuckle\hub, camber kit, radiator, lights, hood, fenders, bumper, rack, core support. My zip is...
  4. c-rex-beat

    90 dx harness burnt crispy

    My buddy has a 90 dx hatch and dropped in a dohc zc. the harness got fried crispier than a 3 piece from popeyes. Can I replace everything from a Si under dash and under hood and modify the few different plugs to avoid dp-mpfi conversion?
  5. c-rex-beat

    D15b7 built and boosted setup

    I am building a D15b7 and want someone with more experience to confirm my build before I order parts. I will be using crower rods for the D15b7, srp pistons for a Z6 to get compression to 8.8:1, slightly aggressive cam from the zc single cam vtec and same zc head. The head is built with blox and...
  6. c-rex-beat

    90 crx si cluster wiring issues

    I have a 90 si and I think the dash and harness for cluster is from an hf. I just put this car together and tach don't work. I refrenced the plugs and wiring didn't match for an si. I do have the small blue plug in center and learned it was for a hf. what would be the best route to get...
  7. c-rex-beat

    electrical load detector code 20

    just got a 90 rex, swapped in a z6 and got this trouble code. where do i begin?
  8. c-rex-beat

    WTB: 88-91 crx/hatch E.TX

    looking for a car in decent shape for cheap. I have a crx with a screwed up driver side. don"t need motor or anything just stock harness and seats. txt with pics if you can. my # is 903 574 9870 josh
  9. c-rex-beat

    crx, not much brake

    89 crx, just replaced front wheel bearings and now no pedal pressure. all lines r good, master cylinder replaced a year ago but that don"t mean it's good. I'm lost.
  10. c-rex-beat

    TX: WTB crx shift linkage ef

    like it says. I'm in 75707 and use paypal. hope someone has one.
  11. c-rex-beat

    WTB: ef stock mounts

    I am needing mounts for my crx. I just need the 3 mounts because I have a hydro trans. If someone has some lying around the shop or whatever hit me up.
  12. c-rex-beat

    rear disc brake conversion?

    What cars can I use the rear disc brakes from to fit my 89 rex? My friend has a del sol and I wanna know if they will work or not before I tear it all down for nothing.
  13. c-rex-beat

    WTB: small monoblock

    I am looking for a good mono amp with about 300-400w @ 2ohm. It's going in my boss truck so I'm not looking to spend much.
  14. c-rex-beat

    FI resistor box

    I have a 89si with z6 in it. Should I remove resistor box and use obd1 injectors or will it not make a difference? it's runs fine as is but wanting it to be more gooder lol
  15. c-rex-beat

    ef with h or f plans

    I have recently completed my first swap by myself and it went fairly smooth. I learned a lot from you guys here and experiencing it myself. Now im addicted to the performance side of a honda. i got this cr-x as a SPL ride and now sold most equipment to support my honda addiction. I got a gsr...
  16. c-rex-beat

    TX: GSR trans w/LSD FS

    Construction and the housing market is gone around here so that is forcing me to sell what I had for b series swap. I have GSR trans w/LSD, shift linkage, axles but no inter shaft, starter that is brand new. I would like to get 500 +ship for it all. If someone wants to pick it up whatever it's...
  17. c-rex-beat

    what ecu?

    My buddy is swapping in an obd1 sc vtec into his 96 civic cx. Can he keep it obd2a and use a p2p? And wires for vtec, just run them to ecu?
  18. c-rex-beat

    z6 sounding rough

    I just swapped in a z6 into a 89 crx. I have no cel but idles a bit rough and sputters when given accelerate. The cel works. I noticed I have one plug and two places to put it. (sounds like this past weekend) anyways, it has a green and red wire both with white stripe. does it plug on side of...
  19. c-rex-beat

    zc swap now stalls

    I just finished this single cam zc swap and got a few issues. no CEL, but stalls. usually starts off in first well but stalls when shift into second. I can push in clutch and it's revving fine but only in gear will it stall. I kept same ef injectors rail all that and using p28. If someone can...
  20. c-rex-beat

    honda emblem? How odd?

    Have you ever been watching tv one day and notice something like this? This is of the eastern counties in TX. The four in the top center make a Honda emblem. The stuff you only notice in a cloudy room.
  21. Try your Search on Google

Back
Top