Search results for query: *

Hey I'm selling a 1988 CRX originally DX converted to obd1 b16A. I'm in the process of starting a business and am no longer interested in my crx. The car is drivable and reliable. It has been sitting a while (6 months to a year), but I have been starting it every now and then. This is a southern...

Hey google almost got my answer for me but not all the way. Heres the problem obd0 to obd1 conversion 2gen jdm b16a on a chiped p28 stock base map and stock setup. Ive got fuel coming out of the injectors during the on key position and during cranking. Ive got a strong spark coming out...

For sale is a b16/b18 ebay 4-1 racing header with a 2.5in oulet on the collector. Never been used. 40.00 dollars PM me or email me at notorious1999@hotmail.com Thanks michael

Hey im looking for an ecu to test my 2nd gen b16a to see if my chipped p28 is causing me problems. Im pretty sure any obd1 ecu will fire it up? p30 p28 p06 p72 p75 Ill pay for shipping and throw on a little extra for using it. It will come back just the way i recieved it. It will take me no...

Alright I know this is covered all over the internet, but for my particular application I couldn't find much. Car is a 88crx dx. Its kinda of turned into a little mess. Heres my setup currently obd1 b16a, p28 chipped from phearable, obd1 dizzy, obx 4 wire o2 sensor, obd0 to obd1 ecu jumper...

Up for sale is a PM5 ecu that was on my 1988 crx dx. ECU is in great condition everythings operational. Also for sale is a D15b2 starter off the same car, works great! Im located in Independence, IA. Prices: starter = 15.00+shipping PM5 ECU = 25.00+shipping For quickest response email me at...

hey im looking for a 88-91 crx parts car or for the fallowing parts 96-00 civic si cluster 96-00 civic si clips OBD0 injectors b series Obd1 header 4 wire heated o2 sensor Radiator 94-99 Gsr cluster B series vtec selinod Seats Rims 4x100mm 4 lug Suspension Climate control...

Up for trade or sale is my 1988 crx SIR. The body is rust free(southern car). Has always been garaged in the winter. exterior is 9/10. I did a engine swap, which is a 2nd b16a with 41,000 miles. Burns/leaks no oil. This engine runs strong. I will do a compression test and post the results. The...

Ok Do you guys think this o2 sensor is placed far enought into the exhaust stream? Its probably a little under half an inch into the stream... The thing that sucks is there are two layers of metal on the stock downpipe, so if i dont seal off between the layers than exhaust will get between...

For sale i have a OBD0 D15b2 with 220000 miles out of a 1988 crx dx. The engine ran fine with the exception of a blown clutch. Includes complete engine minus wireharness, a/c system, transaxle, axles, etc.... Willing to part out or trade as a whole. 100 bucks takes all. Best way to contact me is...

Hey im looking for a speed sensor from a 90-93 integra and im also looking for a obd0 b16a exhaust manifold. LMK thanks

I have for sale the following. All in good and working condition. OBD0 Dizzy 30.00 PR3 virgin ecu 50.00 Dx to Obd0 b16a conversion harness w/ resistor box 150.00 Will post pictures upon request. LMK Thanks

Looking for good condition b16a obd0 fuel injectors throttle cable bracket 90-93 integra MT speed sensor Valve cover Studs ( the peices that thread on the cam caps and that hold on the valve cover) 2nd gen crx rear hatch actuators Climate control panel Stock or aftermarket exhaust header( 2 o2...

Looking for a good condition cable GSR YS1 Tranny. Thanks michael

Hey looking for a few things for my b16a Timing belt cover, top outside half Obd0 b16a dizzy B16a starter B16a exhaust mani B series valve cover, in good shape YS1 GSR cable tranny Thanks Michael

Looking for a pair of 2 gen crx sir axles, or 90-93 intergra axles.. PM me if you got them. Thanks Michael

Looking for Suspension parts for a 96 honda accord. (Rear hubs, controll arms, front right radius rod, etc..) mine are getting pretty rusty lol..

Ok im Planing on tuning my car soon with crome. So my first purchase is going to be a lc1 wide band with a gauge. Ive been doing some reading and i see that you have to calibrate the wideband through the ecu for tunning. My question is do i have to calibrate it if im going to only hook up the...

Hey guys im about to setup up my first turbo rig on my 96 honda accord ex. Base fuel pressure is 40-47psi (without vaccum hose). And im going to use a FMU for my fuel managment.. I know i should probably get a chipped ecu and run a program but im going to do it this way for my first time to get...

Ok I found a link on xenocron for a basemap for my accord, the only problem is that when i try to download it, it tells me to open the "Bin file" with another program and then it gives me a list of programs to open it up with. Ive tried most of them and cant find a program that will open it...