We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by SixtySecondAssassin@Mar 18 2003, 02:54 PM
i have a 92 cx and had a single wire o2 sensor.
Originally posted by pissedoffsol@Mar 19 2003, 03:10 AM
right- the cx is a one wire.
simply pick up a z6 or similar o2 sensor with the wiring.
there are 2 balck wires, a white and a green if memory serves.
Originally posted by SixtySecondAssassin@Mar 18 2003, 12:50 PM
the pin locations for 2 of the wires can be found in the reference section of this site. the other 2 are grounds.
Originally posted by pissedoffsol@Mar 19 2003, 02:15 PM
im not so sure the 2 blacks are grounds
when i put my header on, i cut the harness to re-locate the o2 down to by the cat instead of in the runner.
now, when i put it back together, i had connected the black wires wrong.
the car ran for about a min, and then died.... just stalled right out- CEL. It was a 50-50 shot, and that was the #1 thing that i thought could have been wrong, so we swapped the two balck wires.
its ran ever since.
now, if they were both grounds, exmpalin the above.