crx part out and b series parts

We may earn a small commission from affiliate links and paid advertisements. Terms

yellow88crx

New Member
ok, here is an updated list of parts that are still available and parts that I know are gone
Available
crx dash, so/so shape - $20
b16 alternator with 5000 miles on it - $45
hatch struts - $10
interior wiring/main harness -$75
dx main harness - $50
Si knuckles/hubs -$25 each
Trailing arms with drums -$50 pair
stock fuel tank - $20
upper control arms -$20 pair
stereo bezel - $10
vents, heater core and blower - $40
Perfect doors (no panel, no trim, no locks) - $50 each
Sunroof panel (few bubbles) - $40
sunroof track w/motor - $50
Wipers/motor/arms - $30
Pedals for manual swap -$20
master cylinder/ booster -$40
Proportioning valve - $10
b-series intermediate shaft - $20
rear mud flaps- $25 pair
side skirts -$30 pair

thats off the top of my head, there might be other stuff, but here is a list of parts that are GONE or not being sold at this time!!!
B16 engine
starter
ECU
door panels
seat belts
fender
all lights
cargo divider
cargo cover
rear quarter
rocker panels
mirrors
front mudflaps
front lip
b-series mounts
b-series distributor
axles
carpet
struts
springs
steering wheel
seats
intake
armrest
climate control
engine harness
exhuast
front calipers
glove box
bumpers
tranny
shift linkage
shifter
cowl around shifter
if you need anything that I havent listed, let me know I might still have it!

original message below

hey I have an 88 crx I am parting out. front end collision, front and rear bumpers damaged, rear taillights except the center light, front bumper shattered, drivers fender damaged, headlights damaged hood damaged.

items not being sold - seats, stereo, shift linkage, y1 tranny, shifter/knob, wheels

items already sold - cargo cover, door panels, engine harness, exhaust, front calipers, front mud guards, b series starter, seat belts, rear carpet, cargo box, glove box

I will hopefully post pictures tonight

Everything will be shipping from 27560, morrisville, NC
decent carpet $60 - b/o
alternator (was new less than 5000 miles) - $75
b-series mounts -$50
b-series distributor odb0 (also new, less than 5000)-$100
b-series axles (new cardone axles, less than 2000 miles) -$60
b-series exhaust manifold stainless with 2.5 collector 1 piece, 4-2-1 - $30
decent carpet - $60
doors, no rus - $60 each
no rust rear quarter $75
decent interior plastics
tokico hp struts - $100
springs (not sure what brand) -$50
struts and springs together -$130
cluster -$40
pr3 ecu chipped by wicked innovation -$100
JDM b16 out of a 94 jdm del sol from lucky star motors, I probably have the paper work somewhere if you need it, around 55000 on the motor. 170Hp 113Trq 10.4 Compression I did the timing belt, tensioner, and waterpump on it before I put it in. - $800
momo steering wheel and hub -$70
sun roof track and motor -$75
sun roof panel (a little surface rust) -$50


Let me know what you need, I am sure there is lots of stuff that I am forgetting,

Also, I am in the market for an 88 crx si y-49, and an h23 vtec blue top, and an h2b conversion kit....
 
Last edited:
I will take a picture of them tonight, the engine is still bolted in at the moment, I am having trouble removing an axle nut. they should work in an ef sedan, I believe 88-91 engine bay is the same on all models

sorry added wheels to the not selling list
 
IMG_2136.jpg
IMG_2137.jpg
IMG_2138.jpg
IMG_2143.jpg
IMG_2144.jpg
IMG_2145.jpg
IMG_2147.jpg
IMG_2148.jpg
IMG_1988.jpg
IMG_1986.jpg
IMG_1985.jpg
IMG_1983.jpg
IMG_1978.jpg
IMG_1977.jpg
 
there are some pictures let me know if you want pictures of any thing else, the carbon fiber intake is not for sale, if you need better pictures of the steering wheel I can try, but that one is pretty good

I have no idea what brand the mounts are, they are generic if anything, thats why I only want $50. they worked for my b16, so if your looking for function and not pretty cnc mounts these are the mounts for you, estimated miles are... 5000ish? I am not sure if the person I got them from got them new or used.
 
Last edited:
I might have a shot at another 88 si, but I need money fast, anyone want the b16 for $600?
 
Lost track of threads of who's who and selling what.. Sorry.
What's left??
Still have the B-series mounts?
Any type of 'warranty' on the motor if you still have it? (By any chance, you know about what the weight would be on said motor?
Pass mirror?
Fr. Knuckles/hubs?

E
 
Last edited:
knuckles and hubs are all I have left that you are asking about, motor is gone, mirror is gone, mounts are gone
 
Are these the "SI" knuckles/hubs that are used for the DA brake swap?
Could you email pics of them to me?

IF so, What are you asking for the knuckles/hub assy.
Where are you located.?
I'm at 38654 Mississippi..

E
 
yup, they are the si knuckles and hubs, call it $80 shipped? i am in raleigh nc
 
Back
Top