FS/FT: HUGE MOVING SALE - SO CAL

[hybrid89]

IF YOU LOOK AT MY PARTS PLEASE GIVE IT A BUMP....WE ALL NEED EACH OTHERS HELP SOMETIMES..

Come take these parts off my hands so I don’t have to move them. I am moving in 2 weeks and need this stuff out BAD! I will ship anywhere in the continental US (except for huge items, i.e. whole motors, seats, etc.) Local pick up is always welcome for the So Cal guys/girls. I am Pay pal verified and have vouches on here and Hond- Tech. Prefer Paypal but, Money Orders and Cash work also! Willing to trade ONLY for parts listed at the bottom of this thread. I need to move this stuff, so if you have a reasonable offer on something or have a question, Pm me, reply to the tread, or email me (bigmoneymatt@socal.rr.com). NO LOWBALLERS…I DON’T HAVE THE TIME TO HAGGLE WITH YOUR CHEAP ASS. ENJOY…

ADDED 10/12/04 -NEW NEW NEW PARTS +++++PICS COMING ASAP!

89 USDM CRX si headliner and sunroof liner (grey) very clean, no holes/rips $75 plus shpping

HONDATA 4B (loaded and brand new NEVER USED) perfect for OBD 0 cars (crx/civic b16 b18) - $400 shipped

EF Gas tank w/all lines/pump/wiring (clean and ready to bolt up) - make offer

L3 D series tranny CASE ONLY (no internals) - perfect for cracked cases/leaky cases - $40 + shipping

96 GSR block girdle and main caps (needed for lower girdle setup in ls/vtec, b18a/B, crvtec) - $150 shipped

MANY MORE PARTS TO COME+++++++STAY TUNED.....



89 USDM CRX OEM Bumper lights - $30 shipped

89 CRX Clear Corners (almost new) - $12 shipped

89 USDM CRX Si Master Cylinder - $20 shipped - Brake Booster - SOLD

(2) OBD 0 Injector Resistor Boxes - $25 shipped
(1) set USDM CRX Si Window wiper motors and linkage (front and rear) - make offer
91 USDM EF Under hood Main fuse box – make offer
(2) ODB 0 single wire 02 sensors - $25 shipped

(2) USDM CRX Charcoal Canisters (will fit EG chassis also) - $10 shipped
(2) B18A/B OEM fuel rails - $20 shipped
JDM B16A1 fuel rail - $20 shipped
JDM B16A1 Throttle body (stock bore) - $40 shipped
(2) B series fast idle valves - $40 shipped

(1) set EF Vision knock off power mirrors (no switch) both work - $60 shipped

(1) set USDM CRX headlights (basket is slightly cut from custom setup) – make offer

89 USDM EF OEM radiator overflow reservoir – make offer
89 USDM EF OEM window washer fluid reservoir w/hose – make offer

89 USDM EF OEM hood latch support/x-frame (mint condition / no bends - $55 shipped

89 USDM EF OEM radiator fan - $40 shipped

(2) USDM EF windshield / wiper motor plastic bezel – make offer

89 USDM CRX center taillight section (painted black) – make offer

(1) set USDM CRX rear quarter window interior trim (grey) – make offer

USDM CRX rear trunk plastic (grey) – make offer
USDM CRX rear hatch trim plastic (grey) – make offer

USDM CRX Complete carpet (grey) very clean / no rips / no holes - $90 shipped

USDM CRX rear trunk carpet (grey) no holes / tears $30 plus shipping

USDM CRX rear carpet trunk lid/cover (grey) 1 piece! MINT MINT MINT - $120 plus shipping

This is for the skeptical fuckers who think it might be in 2 pieces..I searched over a year to find one of these clean

USDM CRX OEM mid pipe exhaust – make offer

USDM EF SI rear sway bar - $20 plus shipping

(1) set 93 prelude seats mounted on EF rails (blue grey, very clean, very comfy) - $150 pick up only

89 USDM Si D16a6 head (head, valves, springs, LMA, cam, valve cover) 2 bent valves – make offer

JDM ZC SOHC OEM flywheel - $35 shipped
B18A1 OEM flywheel - $ 40 shipped
Aasco 8.8 lb. Aluminum flywheel for b series (need new surface ring (cheap)) $80 shipped

91 B18A bare Intake manifold – make offer
96 GSR bare Intake Manifold – make offer

B18a1 Head (missing cams, dizzy and I.M.) – make offer

B18a1 bare block, crank, and main caps (spun bearing) - $75 plus shipping

(2) B18A/B windage trays- $25 shipped

(2) b18a/B oil pick ups - $15 shipped

(5) B series oil pans (clean) ((3) B18A/B, (1) b16A, (1) GSR) – GSR $75 / all other $40 plus shipping

96-99 Wedge Racing aftermarket seat brackets (fitment for VW passat/cab – easily modded for Honda apps) – make offer

(2) GSR Valve covers (non cut) - $75 shipped

Things I Want / Am willing to consider for trading:

92-95 EG Hatchback Si Interior pieces (grey / black) must be very clean, no junk, holes, discoloration….mainly need rear plastics, carpet trim pieces, etc

Hondata – show me what you have for OBD 1

SS. exhaust for an EG hatch (Skunk2, HKS, Apexi) no junk

USDM ITR front and rear seats (must been clean no tears, rips, stains)

This list will be updated daily/hourly, so check back often

matt

 

[hybrid89]

bump

 

[GSRCRXsi]

sorry to want something so small but how about a fuel line that goes from the fuel rail to the fuel filter? wish i had the money to take some of that other stuff off your hands . good luck with your sale.

bump for a good seller.

 

[GSRCRXsi]

and lol, i just realized that thats the valve cover i sold you someone buy it!!

 

[NotUrAverage_Si]

Bump for a good buyer.

 

[Ravunous]

How much to ship the block and crank to Corpus Christi Texas 78418
Thanks,RavunousCRX

 

[wespirl]

good seller.... got my stuff fast!!! good luck with sale

 

[B16RacerN2NR]

PM sent

 

[hybrid89]

Originally posted by GSRCRXsi@Oct 8 2004, 02:29 PM
sorry to want something so small but how about a fuel line that goes from the fuel rail to the fuel filter? wish i had the money to take some of that other stuff off your hands . good luck with your sale.

bump for a good seller.

[post=400169]Quoted post[/post]​

Ian - I have a bunch left over...shoot me your address to my pm and I'll throw one in the mail for ya. and yes that is the valve cover I bought from you, I realize that OI own 5 of those bastards. hahaha matt

Pm's replied..Thanks guys for the help ( Mike, Ian,, etc.)

Ravanous - I need to weigh it and get back to you later today on the block, should be too much though.

B16 racer - check you PM

matt

 

[NotUrAverage_Si]

Originally posted by hybrid89@Oct 9 2004, 09:27 AM
Pm's replied..Thanks guys for the help ( Mike, Ian,, etc.)

[post=400494]Quoted post[/post]​

no problem Matt.

 

[b204dr]

for the b16 how much for just the head.. i will offer 500 shipped? if u still have it ( No bent valves or ne this is there

 

[hybrid89]

Originally posted by b204dr@Oct 11 2004, 10:16 AM
for the b16 how much for just the head.. i will offer 500 shipped? if u still have it ( No bent valves or ne this is there

[post=401128]Quoted post[/post]​

B16a is gone..traded for a GSR short block..sorry gotta take it out of the thread

matt

 

[hybrid89]

Originally posted by hybrid89+Oct 11 2004, 11:09 AM-->

b204dr

@Oct 11 2004, 10:16 AM
for the b16 how much for just the head.. i will offer 500 shipped? if u still have it ( No bent valves or ne this is there

[post=401128]Quoted post[/post]​

B16a is gone..traded for a GSR short block..sorry gotta take it out of the thread

matt

[post=401145]Quoted post[/post]​

afternoon bump

 

[integraslut78]

Matt - Thanks for the CTR pistons I appreciate it. I will let you know how they do when I get them in.

 

[civicious]

bump for a good seller...


(got my b18 today)

 

[hybrid89]

Originally posted by civicious@Oct 11 2004, 06:13 PM
bump for a good seller...


(got my b18 today)

[post=401293]Quoted post[/post]​

civicious-check your om regaurding the rods/bearings. Thanks guys for the kind words, just trying to move my stuff out for new junk!

matt

 

[Ravunous]

shipping on the block?

 

[hybrid89]

Originally posted by RavunousCRX@Oct 12 2004, 06:33 PM
shipping on the block?

[post=401822]Quoted post[/post]​

shoot me your addy to my pm and I'll get you a quote on shipping.

matt

 

[GsrIntegra94]

Do you have a b16 hydro tranny for sale/trade?

 

[hybrid89]

Originally posted by GsrIntegra94@Oct 13 2004, 02:25 AM
Do you have a b16 hydro tranny for sale/trade?

[post=402031]Quoted post[/post]​

sorry i don't

matt