this is kinda long and most will find it rather entertaining....so here goes!
so as most of you all know, ive been driving my truck because my Mazda 3 broke down. this morning, i got in my truck, let it warm up and put some air in the air tank so when i get off work, i will have some air to lift up. i get to work and leave the truck aired up. i walk in, go to work and do my thing in there.
i come outside from work on my way home and see my truck is sitting on the ground. no biggie i thought, i got inside, started it up and went to frlip the compressor on. well it didnt come one because its like 9 degrees outside. i get some hot water and try to thaw stuff out so i can get air into my air tank. air was not being pumped in the tank and the compressor wouldnt kick on. i finally look under the hood and notice my inline fuse is blown. no biggie, i had another one so i put it in and the compressor kicked on. it still wouldnt get air. so i get another thing of hot water and pour water over my water trap. nothing. so i go inside and get a torch and try heating things up a bit with it. i ended up burning a hole in my air line that goes from the tank to the pressure switch. i cut that off and put the air line back in. still not pumping air into tank. i get pissed and decided to call James to meet me at a gas station and follow me home. i get down to the gas station and wait for James. i get to looking at the air line that i had just cut and there is a kink in it. well thats a problem. James comes and he has a pair of cutters and i cut the section of the kink out and put the air line back in. i wait...and wait for air to get in. now im only getting 20psi into the tank and no more. after about 30 miutes of messing with some more and making a few phone calls, i decided to drive home with the truck slammed on the ground. it was the most nerve racking drive home for me. i get the truck home...well park it on a side street because i cant get in the driveway. this sucks. i hope it can get warmer soon so i can get to put some air in it with minimal problems. UGGGG!!!!
no cliff notes...just read it!
so as most of you all know, ive been driving my truck because my Mazda 3 broke down. this morning, i got in my truck, let it warm up and put some air in the air tank so when i get off work, i will have some air to lift up. i get to work and leave the truck aired up. i walk in, go to work and do my thing in there.
i come outside from work on my way home and see my truck is sitting on the ground. no biggie i thought, i got inside, started it up and went to frlip the compressor on. well it didnt come one because its like 9 degrees outside. i get some hot water and try to thaw stuff out so i can get air into my air tank. air was not being pumped in the tank and the compressor wouldnt kick on. i finally look under the hood and notice my inline fuse is blown. no biggie, i had another one so i put it in and the compressor kicked on. it still wouldnt get air. so i get another thing of hot water and pour water over my water trap. nothing. so i go inside and get a torch and try heating things up a bit with it. i ended up burning a hole in my air line that goes from the tank to the pressure switch. i cut that off and put the air line back in. still not pumping air into tank. i get pissed and decided to call James to meet me at a gas station and follow me home. i get down to the gas station and wait for James. i get to looking at the air line that i had just cut and there is a kink in it. well thats a problem. James comes and he has a pair of cutters and i cut the section of the kink out and put the air line back in. i wait...and wait for air to get in. now im only getting 20psi into the tank and no more. after about 30 miutes of messing with some more and making a few phone calls, i decided to drive home with the truck slammed on the ground. it was the most nerve racking drive home for me. i get the truck home...well park it on a side street because i cant get in the driveway. this sucks. i hope it can get warmer soon so i can get to put some air in it with minimal problems. UGGGG!!!!
no cliff notes...just read it!