Pick A Header

Which one of these would u choose?

  • Spark Racing Header

    Votes: 0 0.0%
  • Vibrant 4-2-1 Hea

    Votes: 0 0.0%

  • Total voters
    5

Del Souless

Junior Member
All headers are relatively need header's besides the ProFab design model. I have the money saved up for one but now is which one out of the group that I want to get. All are 4-2-1 headers with 2.5 collectors, so if you were to suggest a header it has to be in those parameters. Priced around 6-5 hundred at most for a header if suggested.

New spark Racing header

Newly designed Vibrant Header
 

jamesA

Thank you for your business.
VIP
DC sports 4-1 header.

284 shipped.here. note: scroll to your application, I have it bookmarked for the one I'm going to get.

Seems they just raised the price, it used to be 270 shipped.
 

Bl6CRX

Senior Member
Yeah negative on all those (with exception to ANR)

Go with a prospeed, bisi moto, eriks racing, header.

All are made by the same guy and make huge power for all motor applications.

The worlds fastest all motor pro stock B series cars are running these headers.

Now thats a 'Nuff said right there.
 

sohcslammer

Senior Member
You must be confused. Hy-tech is a real header unlike those ANR POSs. <_<

Read for yourself ...

" ...At $795.00 each, these headers are unquestionably the best power per dollar investment the serious enthusiast can make..."

John not only makes unreal headers that ARE PATENTED, he also makes some of the best K series components around.

Hytech home page
 

Bl6CRX

Senior Member
Now way your the confused one.

Lesile Durst gained 20 WHEEL HP off a header that Bisi designed and Steve Brown produced over her previous race header. Now true, this was a fully built race motor.

BUT I PERSONALLY watched one of these headers make 8 whp over DC, and this was a motor with STOCK internals.

Now I never compared mine, but my setup making 200 whp and 145 tq is a damn good load power out of a completely stock internals b20 vtec.

Because I have been so busy with college this last year I have not been able to pay attention to the all motor field. But the last year the three worlds fastest all motors (excluding the Skunk car running a K series)

Bisi Ezerioha
Erik Agurilar
Leslie Durst

There are many other cars in the field that run these headers. For some reason they have chosen these headers over hy-tech Why? Cause these headers make the most power. When these drivers are thousandths of a second from each others records they are going to use what gives them the most power, and what gives them the most power are these headers produced by Steve Brown.

Anyone can make a website and with claims of power gains and anyone can go get a patent. But, to me I'll trust the proven performance and choice of three of the worlds fastest all motor hondas and what I HAVE PERSONALLY WITNESSED. There is no denying the power these headers make.

The B/D/H series headers produced by Steve Brown have proved themselves and are trusted by the industrys best period.

Now, is hy-tech header bad, I wouldn't know, but these headers are proven effective. I have to assume Hy-techs claims are based on their top header which costs 1375!! these headers can be had for around 900 retail.

Check em out:
http://www.ericksracing.com/
www.prospeed-performance.com
http://www.exospeed.com/
 

brian11to1

Senior Member
Originally posted by pissedoffsol@May 30 2005, 10:45 PM
spark racing sucks. all their shit breaks, plus their CS is bullshit.

AN-R is right in your price range.

hytech is bad ass, as is SMSP, but frankly, they are double wha tyou're looking to spend.

i have an AN-R.

http://www.hondaswap.com/forums/index.php?...ype=post&id=144
http://www.hondaswap.com/forums/index.php?...ype=post&id=142
http://www.hondaswap.com/forums/index.php?...ype=post&id=143
[post=505482]Quoted post[/post]​


how much did it cost you?
 

sohcslammer

Senior Member
Originally posted by Bl6CRX@May 30 2005, 02:18 PM
Now way your the confused one.

Lesile Durst gained 20 WHEEL HP off a header that Bisi designed and Steve Brown produced over her previous race header. Now true, this was a fully built race motor.

BUT I PERSONALLY watched one of these headers make 8 whp over DC, and this was a motor with STOCK internals.

Now I never compared mine, but my setup making 200 whp and 145 tq is a damn good load power out of a completely stock internals b20 vtec.

Because I have been so busy with college this last year I have not been able to pay attention to the all motor field. But the last year the three worlds fastest all motors (excluding the Skunk car running a K series)

Bisi Ezerioha
Erik Agurilar
Leslie Durst

There are many other cars in the field that run these headers. For some reason they have chosen these headers over hy-tech Why? Cause these headers make the most power. When these drivers are thousandths of a second from each others records they are going to use what gives them the most power, and what gives them the most power are these headers produced by Steve Brown.

Anyone can make a website and with claims of power gains and anyone can go get a patent. But, to me I'll trust the proven performance and choice of three of the worlds fastest all motor hondas and what I HAVE PERSONALLY WITNESSED. There is no denying the power these headers make.

The B/D/H series headers produced by Steve Brown have proved themselves and are trusted by the industrys best period.

Now, is hy-tech header bad, I wouldn't know, but these headers are proven effective. I have to assume Hy-techs claims are based on their top header which costs 1375!! these headers can be had for around 900 retail.

Check em out:
http://www.ericksracing.com/
www.prospeed-performance.com
http://www.exospeed.com/
[post=505318]Quoted post[/post]​



:D

Aren't we full of piss and vinegar today? :lol:

This is one of those that nobody wins. You have your oppinion and I have mine. I have just seen a ton of proof to back up hy-tech's claims, not to mention that 4 of the 5 builders in scc's B-series shootout used one of John's headers.

Also, Bubba, who BUILT Leslie Durst's car, recomends Hy-tech. Ask Jonathan.

I'm also not knocking Steve's headers at all, but I am crapping on An-r. I know 2 people that have ordered headers through them and BOTH showed up with rust on them and SHITTY welds. I don't know where this rumor about them having great headers came from. I'd rock the JG header before a an-r. :ph34r:
 

posol

RETIRED
Staff member
an-r's aren't "finished" thats why they don't look all bling. its just plain old steel.
i had my buddy who welds for a living look at mine, and he said it looks fine.

i paid 500 bucks for it.
 
Top