Rotas

We may earn a small commission from affiliate links and paid advertisements. Terms

eyesonlybob

Senior Member
ok, well i got my rota slipstreams, and i need to get the center cap out of them. i took out the 5 allen bolts, but it wont budge. there are like 5 clips on the inside of the wheel. any tips on getting it out?
 
Just get a screwdriver or something that will fit in the hole on the other side and tap it out.
 
i install and balance wheels for a living right now. just get the installer to do it. He will probobly just ram them out with the spindle as he puts the on the balancer. If you want just use a wooden dowel or something soft and pound them out from the inside. They shouldnt break, if they do... well then something is wrong with them
 
Back
Top