The Ian-fails-at-life CRX track car partout

We may earn a small commission from affiliate links and paid advertisements. Terms

GSRCRXsi

Super Moderator
VIP
located in Baltimore, MD

ok so as i mentioned in this thread

https://hondaswap.com/auto-multi-media/bringing-crx-back-track-build-thread-495966/

I'm parting this out. nearly everything in that thread is for sale, but i'm going to post things here little by little as i get to it.

I'll start with the suspension. nearly everything has been installed on the car for about 2 years, but has just been sitting in the garage. only about 50 miles (if that) on the parts. all parts are on the car, and will be pulled shortly and/or when someone wants something.

prices shipped where stated, shipped prices to lower 48 only, elsewhere may cost extra, larger items will probably require pickup.

i'm pretty reasonable, any questions feel free to ask.


90-91 CRX amber corner lights "JDM" - $35 shipped
-replica JDM lights
-fits like OEM
-only one bulb like JDM
IMG_4408.JPG

IMG_4410.JPG




90-91 CRX cluster hood/cover - $35 shipped
-great condition
-dont have the rear screw covers
-small LED installed on the right hand side from a security system
-comes with the pictured switches
IMG_4405.JPG

IMG_4407.JPG


CRX Si dash - $50 picked up (no shipping)
-no tears or rips
-good condition
IMG_4402.JPG


Autometer Sport-Comp Silver 5" tach - $75 shipped
-comes with shift light w/cover
-comes with mount
IMG_4404.JPG


Moroso oil catch can - $50 shipped
-comes with what you see
-same can that comes in the Endyn kit
IMG_4403.JPG


Rebuilt OEM CRX Si steering rack w/ Energy Suspension bushings - $200 picked up (we can talk shipping if we must)
-completely disassembled and re-assembled/re-greased with BNIB OEM seals and bearings as per the Helms manual
DSC02593.JPG

DSC02594.JPG

DSC02606.JPG



Master Battery Cutoff Switch mounted in custom carbon drivers side vent mount - $75 shipped
-brand new switch, never used
-switch has integrated alternator protection
-not the prettiest, but it works very well and easy to mount and remove, installs and removes like the stock vent
-made from a hollowed out stock vent, with carbon panel epoxied to the front.
IMG_0549.JPG

IMG_0550.JPG

IMG_0552.JPG

IMG_0556.JPG






SOLD STUFF

91 CRX Si front knuckles with new OEM wheel bearings, balljoints, and ARP extended studs installed - $SOLD
Hardrace EF/EG/DC Rear camber arms with spherical bushings - $SOLD
Hardrace EF/EG/DC rear toe links with spherical bushings - $SOLD
CRX Front LCAs with Spherical bearings - $SOLD
Hardrace EF/EG/DC Rear LCAs with spherical bushings - $SOLD
PCI offset rear trailing arm spherical bushings - $SOLD
Skunk2 CRX Front Upper Control arms, camber adjustable - $SOLD
Both rear CRX Triangle trim - $SOLD
Full-Race Traction Bar for CRX - $SOLD
Front and Rear bumpers - $SOLD
Front fenders - $SOLD
Passenger Door window glass - $SOLD
ALL Trim - $SOLD
VIS "JDM" USDM CF hood with Aerocatch hood pins - $SOLD
SMSP B18 4-2-1 Header Jet-Hot coated black - $SOLD
FastBrakes 11" Wilwood front brake setup for CRX - $SOLD
Koni Race / Ground Control combo - $SOLD
3x Autometer Gauges + Custom CRX heater control gauge holder - $SOLD
TR Motorsports C1 wheels 15x7" +42 w/ Kuhmo MX 205/50/15 tires - $SOLD
90-91 CRX amber bumper lights - $SOLD
Custom B-series tucked engine wire harness - $SOLD
90-91 CRX tail lights - $SOLD
 
Last edited:

awptickes

unimpressed by you
VIP
Is the bad link indicative of the failure?

Good luck with the sale. That CRX deserves better than it's had recently.
 

GSRCRXsi

Super Moderator
VIP
DC stuff?

btw, some more parts added

wilwood brake kit
full-race traction bar
skunk2 arms - edit - sold
wheels/tires
 
Last edited:

GSRCRXsi

Super Moderator
VIP
someone out there wants a nice Koni race setup for their CRX ;)

(...and everything else)
 
Top