VTEC HEAD ON ZC BLOCK

We may earn a small commission from affiliate links and paid advertisements. Terms

Status
Not open for further replies.

Drenni

Senior Member
Is it possible to make a mini-me with a car that's obd0. What do I need to make this happen and it is a good mod to do. Has anyone done this I'm sure someone has done it. I sawin ebay a harness conversion for obd0 to obd1 what else would I have to wire besides the vtec cables etc etc..... I going to use the head for 92-92 civic for the mini-me.

thanks, guys
 
Originally posted by B18C_NA@Feb 19 2004, 11:06 AM
the JDM ZC DOHC can probably be fitted with the B16 head.  I'm not sure, i haven't seen one before.

There is another thread right above this one that very clearly states :no:.
 
Drenni- you can only "mini-me" the SOHC ZC, not the DOHC ZC. The SOHC ZC bottom end is identical to the D16A6, so just follow the directions on how to convert that and you'll be fine.
 
This is not the engine building forum, and has nothing to do with ef swaps.
 
Status
Not open for further replies.
Back
Top