Recent content by 894DSiR

i think the difference between the teg d series and a zc is about 10 hp or something like that, not really worth mentioning for you. i would say go B series, would be sweet in a first gen teg, and i dont think it would be to much different then going B series in an 88-91 civic

http://hasport.com/Products/Mount%20Kits/Mount%20AVB1.htm hasport makes mount kits for 88 tegs for b series

you need to modify the engine wiring harness that was on your dx motor and put that one on your B16 (DX/D15 engine wiring harness + add wires to it + B16 motor = B16 with modified dx wiring harness) so take of the si harness, take the time to do a search on how to do the dx to sir and do a...

it could be the fuel pump going bad, sometimes when they start to go bad they take a while to build up fuel pressure, this could be why it takes a while to start your car when its sat a while. you need good fuel pressure to start the car. hope that helps

oh ya, you said that you are also doing an auto to manuel swap, i have done this to a few 88-91 civics so if you have any problems e-mail me, as i dont visit this site on a regular basis

when i did it to my civic i had to take off the power steering cooler and lines that go in front of the radiator. and use the b16 power steering pump, because the my d series pump would not mount to the engine, also had to use the teg power steering line that goes from the pump to the power...

Junk yard or Egay

are you talking about dohc D and sohc D series engines cuz they are interchangeable, like a zc fuel rail is the same as a d16a6 from a civic or d16a3 from an integra they are all the same

your sizing them up from pictures??? ok

yes i have, i have a b16 in my 4 dr civic. my old fuel rail was kinda messed up looking but it still worked, but i wanted to get a nicer one. my friend whitewrx02 has a shop , he mostly works on 88-91 civics and he has extra fuel rails and intake manifolds from civics up the yang. i tried 2...

d series fuel rails are all the same... and b series are all the same = B-D fuel rails not interchangeable

first of all. no, B16 and D16 intake manifolds are not the same. bolt patters are different, and no the fuel rails are not the same the injector spacing is different, and the fuel rail mounts are different

on the obd0 dizzy, only 2 of the 3 bolts will line up. im not sure, but everything else should work. but if your getting a complete b18 it should come with one, and if its 90-91 it will work with obd0

that link didnt work let me try again instructions

ok what code is your ecu throwing, if its a code 19 then its your auto trans lockup solenoid and you have two options 1 replace the ecu with a manuel ecu, or 2 if you have any experiance with soldering you can mod it. Instructions can be found here Instructions i would personaly recomend that...