hey gyus, thanks for your input.
I got a couple of club blockers, alpha lock 2000 and a couple of kill switch surprises installed. GPS locator in the progress... That should do it ;-)
Hey fellas!
Drove in a bad snowstorm and the alternator died in the middle of the trip - wonder if it can be related, the alternator had only 50k on it, and so does the motor.
Now the question (yes i did search and want to confirm):
Motor = jdm b16a sir1 obd0
Alternator that WILL fit is...
Hey, maybe you are using slightly wrong gasket for vtec solenoid -
for example b16a Sir1 engine needs gasket off 90-91 NSX.
Search the forum for those keywords for the part #
Hey, i had the same issue with my older CRX. The problem was a scratch on the distributor cap - after the rain the spark was shorting outside of the cap... make sure your distributor is dry and maybe replace it. I used to kill my battery before the car starts in the wet weather... Good luck
UPDATE:
hey, guys. I would like to thank EVERYBODY for their support and input.
The bad news - the thug is still on the loose. But if he dares to give my CRX another shot - he will get a very special welcome, and thats gonna be tough, cos it's not parked in the same neighborhood.
The good...
UPDATE! attempt to steal my CRX
hey, guys. I would like to thank EVERYBODY for their support and input. The bad news - the thug is still on the loose. But if he dares to give my CRX another shot - he will get a very special welcome.
The good news - the thief is in no way related to the...
Hey Guys, thanks for your help. I replaced 2 vtec solenoid seals, 2 cam seals on the driver side and a cam plug seal on the passenger side. Changed the valve cover seal as well. Looking good now.
Thanks for all your help!
Do you guys recommend using Energy Suspention bushings? Or am I better off with OEM rubber?
OK, after digging online here is what needed for 1990 CRX Si:
16.7102 Front Strut Rod Bushings - Honda Civic, CRX
Source: Energy Suspension 16.7102 Front Strut Rod Bushings - Honda Civic, CRX
But...
Hey, guys. I have a pretty low B16A CRX, sitting on stiff Eibachs.
Here is what happens when you drive around Jersey City ;-)
http://physics.ramapo.edu/~alex/oldie/crx_strut.jpg
For now, i just put it back in and tightened. I guess I need to
replace the whole rubber piece? Whats the best...
Haha. Let's be more optimistic!
There must be some. Here a little list from some other forum i dug out.
Anybody can confirm/ADD?
Let's make a little go-to list here.
Importech motorsports
Rt. 23 North, west milford NJ
973-208-9333
Machine Shop
Ryan Industrial
Tel.732.566.9538
Stage2...
Hey guys, i'll need some minor stuff done on my B16A CRX, like changing a few seals and checking some other stuff, etc. Can you point me some trustworthy mechanics/shops who are familiar with JDM swaps and wont rip off a new customer? If I find a great mechanic i won't mind extra travel. I am...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.