Recent content by Bill H

I have @ 12 of these for sale. No tires. asking for $50 per wheel plus shipping (@ $25 per wheel) Email me at wherron1 at Gmail dot com

harness I have a harness off of a D15B7. If he doesn't come through, email me at wherron@bmwe30.net

Last chance, anyone want anything off of this engine? It's leaving the garage within the week, one way or another.

It was a 5spd, I will have to check and see if I still have the ECU. As for selling the harness/ecu, would rather sell the entire engine. But, , if no one wants it within the next few days, it's yours. What is it worth?

Complete engine, minus the Distributor (already sold). Engine is out of a 93Civic ex. 180,xxx miles. engine ran when pulled, but smoked alot. Cyl 3 and 4 are dead (Compression numbers cold 155, 150, 50, 55. With oil in the cyl, 190, 195, 210, 220). complete wiring harness included. Will part, so...

Well it's all done. Instard of hunting for the right connectors, i just ordered the wires from RYWire. Once I had those, everything plugged in place. Thanks again for all the help. Bill

I worked out the MAP sensor. I traced the wired from the engine harness sensor plug to the plug on the shock tower. The corresponding pins on the chassis side of the plug were empty, So I pulled the wires out of the chassis sensor plug and put them in the correct locations on the strut tower...

Well, I am using the engine harness form the D16Z6 engine and it has a MAP sensor plug on it. Do I need a new ECU harness?

One more question I have the engine in and it runs (Woohooo). but, the old engine had the map sensor on the firewall fed by a hose. the new engine (the D16Z6) has the map sensor on the throttle body. Which one do I use? how do I adapt? If I use the new one, what do I do with the wiring for the...

ECU Wiring It looks like we are going to use one of the kits from RYWire Rywire - Online Store In the long run I think this will be alot easier. I have the engine mated to the transmission and hung in the car, now all I have to do is get everything all hooked up. Should have it together by...

Even MORE questions 1st, TY Calesta, I have a way of doing things like that:cool:. B, inrenseneal, The 93 civic DIES have the plugs, and while I will have the engine harness, I won't have the chassis harness. So, my understanding is, that all I need to do is run the 2 vtec wires from the ECU...

Utrax42 , ECU question So I should use the old ECU (93 Civic DX) ? or the one that is in the donor car (the car the new engine came FROM, it's a 95 EX Civic EX Coupe) I figured I needed this ECU for the VTEC to work.

Ecu I may have the Distributor for sale after this swap is done. I am hoing to have the new engine in this weekend. Once it's running, I'll let ya know whats up. Thanks, Bill,

Which wires are needed for VTEC ? I am starting this swap. what wires do I need to run? Does anyone know the pinout for this? Thanks, Bill-H