Recent content by xxxmikenicexxx

Looking for a large spline cable tranny...low mileage, no grinds. Also looking for a Quaife or equivalent LSD, and an Exedy/Tilton twin disk. Let me know what ya got!

Ive made some progress today. I spent a lot of time with my multimeter checking stuff, and I have found all 4 connections for the headlight side, leaving me 4 extra on the cabin side (I found an extra wire I forgot to run through that happened to be the P/S fluid pressure switch). The 4 extra...

Yeah I know, but its on the driver's side, and if youre talking about body ground g301, then I have already accounted for all those, which is why Im so confused.

Sorry about that, the topic title got cut off, its a 1993 Integra LS with a B18C1 motor, but in this case the motor doesnt make a difference as my problem has to do with the main harness.

Anyone who can lead me to the answer I will paypal 30 bucks to right now!!!

Hey guys, Im really hoping someone can help me out here. I recently undertook the project the off stripping the engine bay and relocating all of the wires outside of the bay in the fender rails. I cut the wires in the bay, pulled them back into the car, and ran them outside. Well, I really dont...

Bump!!!

Alright, well let me see if I can find a dolly or trailer to get the car there and Ill let you know, thanks so much for the help.

Looking for around $130, they were cleaned and flowtested with new seals...comes with paperwork to prove this and flow rates.

Oh no I mean the body side mount, you know, with rubber, thats the mount BRACKET youre looking for. Sorry but I do not have that. I will see if anyone I know does. If you happen to need anything else on my list just let me know man, youre local so you are more than welcome to check stuff out in...

Thanks will do!

Its the timing belt side...the one that bolts into right near the shock tower if thats what youre looking for? I live near Newport so you could pick up if thats what you need...LMK

Thought Id ask some of you guys here just in case...Im about halfway done with my wire tucking/relocation and Im looking to paint my engine bay when all is said and done. I have a friend who paints but I figured I would see if maybe anyone on here is a pro in case my friend cannot fit me into...

Come on, I need this stuff gone...keep package deals in mind especially for the stock parts!

formby, 1fasteghatch - Emails sent! Lender69 - The rods are used, they should be around 700 miles or so. Since these rods go for $350 brand new, Im looking for about $250 or so. Let me know and I also have pics. Email me either way. Thank you!