Search results for query: *

Im looking for a manual steering rack & pinion for an 89 si hatch. Im in illinois, let me know.

k or not

Well I got the 02 problem fixed, the wire going into the harness was repinned to a different socket...i dont understand why the chickenfooker before got everything a$$-backwards.. cyl sensor is correctly pinned with no shorts to ground..going to recheck timing this weekend otherwise goin to get...

Ya i meant to ask if *the cylinder pos sensor is zc only*..but thanks, i might have to go get one

Well regardless, its throwing a code 20. I bought another o2 sensor..didnt fix it. Switched the wires on the cyl pos sensor..didnt fix that either. These sensors are zc only, not teggy correct?

Its throwin 1 (o2 sensor), 9 (cyl 1 position), and 20 (electronic load). Timing is balls on, used the timing writeup from zcspeed.com. Is the electronic load pos in the fusebox under the hood or under the steering wheel? Im going to buy a generic 1wire 02 and see if that goes away, and will try...

Well I got the usdm 89 teggy ecu.. it helped, but still throwin codes.. Some of the wire colors on the plugs dont match what ive looked up in the chiltons or haynes, or the online forums, a few are cut off the plugs that dont match, and a few are cut off the harness that are hanging that dont...

Its an Si, the CEL comes on and stays on after it runs for a little while, I already retimed it and its dead on. Throwin codes 17, 1, and 20. The trans was a DX, but I swapped out the ring gear and pinion shaft to the SI 4.25 gears because I had to replace a bad shift fork.

I recently bought an 89 hatch w the blacktop dohc zc swap and the wiring to the ecu and sensors is hacked. Is there a good link or reference anyone has to what the correct wiring for the swap would be? The car has a PM6 ecu, would it benefit it alot to get a PM7 ecu? The O2 sensor has the...

I spun a rod bearing.. looking for a good crank and/or rods for a dohc zc or d16a. maybe even a motor if you have one cheap!

how much for just the crank and rods, or whole shortblock