Search results

  1. jbdakid

    Problems with my rear disc conversion

    This turned out to be money!! The difference is so big, I should have changed this MC even before I put the discs on the rear. It really feels way better!!! Car stops really good now. I'll probably change the prop valve when I get Integra front brakes, but for now this is already much better...
  2. jbdakid

    Problems with my rear disc conversion

    I really don't want to change both, do you know which MCs will just bolt up and get me more pressure?
  3. jbdakid

    Problems with my rear disc conversion

    Thanks for the suggestion, I went back and bled all four corners again and it got better but still not what it was. I'm assuming it should be much better now that I have discs in the back, but I think I'm going to change the Master cylinder. Like I said, I have a 92 CX hatch and my rear disc...
  4. jbdakid

    Problems with my rear disc conversion

    I did my conversion using 99 Civic Si parts. Rear trailer arms, calipers and e-brake cables off of a 92 Si hatch. My car is a 92 Civic CX hatch. Everything fits and bolts up. I bled the brakes but I can only get a little pressure on the peddle. Not enough to stop the car? When the car is...
  5. jbdakid

    H22 Swap harness

    For those of you who have OBD 1 or 2 H22s in your CB7 Accords, where are you getting your harness made. I understand it requires a hybrid harness. Can anyone recommend a place to make this? Thanks.
  6. jbdakid

    H22 into CB7 wiring help

    Anyone?
  7. jbdakid

    H22 into CB7 wiring help

    As the title says, I am planning on putting an H22A4 into a 93 Accord EX and I am concerned about the VTEC wiring. I've read that I can use the accord's harness and just add a few wires. Does anyone have a good list with pictures of the connectors that I will need to get and the wiring that I...
  8. jbdakid

    civic hatch disc brake conversion question

    Great, thanks.
  9. jbdakid

    civic hatch disc brake conversion question

    Sorry to wake this back up, but which Master Cylinder do you need? 92-95 EG Si? Or one off of an integra? Thx
  10. jbdakid

    gsr tranny vs b16 tranny

    I have a B18B, I just put in a B16 trans but I installed an LS 5th gear! To me, that's the winning combo!!
  11. jbdakid

    OBD2 B18B1 into 92 Civic CX

    In my situation, I used OBD 2 stuff. Altenator and distributor. I took the whole obd 2 B18B1 engine and dropped it in and plugged it up to the shock towers and it's been running ever since.
  12. jbdakid

    OBD2 B18B1 into 92 Civic CX

    I have tried both the P75 and the PR4 and I was able to rev past 7000 and I get way more than 18 mpg with either one. I'm not sure what your issue is but I'm not having those problems with the P75.
  13. jbdakid

    B16, GSR, or LS Tranny?

    I want to do this, have you done this yourself? Other than the LS 5th gear itself, what else do I need to buy to make this work? Thanks.
  14. jbdakid

    Junkyards in PA

    We Got Used.com Here you go. I used to go to the one in Hazelton a lot but lately the Honda stuff goes fast.
  15. jbdakid

    Recomendations on a '95 Integra LS

    A couple questions? Did you mean to say a 98 Integra? Is it a manual? If it's a 98 Manual LS Teg, I would suggest getting a GSR trans for it first. It will really help that LS motor come to life. Even better would be a B16 trans but they cost more and the 5th gear is real short for the highway...
  16. jbdakid

    WV 1993 Acura Integra GSR - PARTOUT

    Does this have a cable trans or a hydro trans?
  17. jbdakid

    H22 Longblock swap question..

    This car will not be heavily modified. It's a daily.
  18. jbdakid

    H22 Longblock swap question..

    Thank you sir! This is what I needed to know. The H22 that is in the car is drinking oil and has low compression on all cylinders. I am going to replace the long block for sure. I just thought that I could gain some horsepower in the process. Thanks.
  19. jbdakid

    H22 Longblock swap question..

    I have a 98 Prelude (non-SH) and I am going to replace the longblock. My question is, can I use the JDM Type S long block (220HP) instead of getting another USDM longblock (195HP)? I live in PA so we have inspection and emissions every year so I need the car to run without the CEL being on. If I...
  20. jbdakid

    FS: 1991 B18A longblock and 92 YS1 transmission **PA**

    I have for sale some Honda Stuff in south central PA. 1. 1991 B18a longblock with about 100k miles on it. I have started the motor and it runs but I don't know anything else about it. I purchased it around a year ago on eBay. I put a brand new timing belt and water pump on it. $400...
  21. Try your Search on Google

Back
Top