Search results for query: *

was your carburated or not because my friend wants to do that swap thats why im looking around and after an hour i found your post can you email me and let me know the things you had to convert my email is CIVICHBWITHB18A1@YAHOO.COM let me know something

it will fit with a custom drivers side mount 88 91 tranny only four blots plus a starter bolt but many of people do this swap so dont say it cant be doneyou can have you car wired to use an 88-91 si distributor and get rid of the external whatever the f*** it is.

i think he should just get a muegen chipped pr3 ecu it will work without wireing it plugs straight in it kicks in vtec at 4500 and fuel cut off is at 10000

it is obdo. the ecu will work you also need integ throttle cable and sometimes the integ clutch cable.

i got a 14.00 flat with b18a1 gutted no ac or heater header ram air intake wires and underdrive pulley. but i also had a b16 tranny. 1.7 in the 60

i was told the 89 zc has a two part distributor system. i need to know how to integrate it into one or if i can just wire it up just like it is.also does the 88-91 civic si tranny bolt straight up to the zc. i was told that just one side will match. will the 88-91 si intake work? i was told it...

my friends 88 civic dx is flashing code code 5 then a split second later it flashes 2 then pauses then flashes code 20.

second gen Eclipse 450cc injectors will fit

yes you have to shave the mfront mount and as far as the 6 x 6 indention i dunno about

the ecu should but the distributor has different inernalts and it is obd1 so just go with the '90 - '91 distributor

you will need of couse the motor. the transmission varies. if you are going to go with the crx then you will need a cable transmission. meaning the clutch is cable activated. the '90-'93 integra Ls will be best for high way driveing and if you want better acceleration go with a cable b16a1...

i need the left motor mount on a 90-93 integra. i only need the piece that bolts doen to the block. i dont need the part that bolts to the engine bay. i also need the rear motor mount. the piece that bolts down to the block. i need the special bolts to hold on the half shaft. i was told they...

hey does the 88 prelude have the b20 in it i thot that it was a sohc. do you think the flywheel will fit on to a b18a1 acctually it is an 87 prelude that i can get one off of but it still has the 2.0 si motor let me know

matching the colors shouldnt work but all you really need is an '88 -'91 si wiring harness it will work

do you want a cable tranny or hydrolic. i got what you want either wayexcept throttle body. i got the intake manifold but dont have the throttle body. but i can probably get one. if you do wan to trade let me know . you pay to ship the stuff i want and i will ship the stuff you want. but i live...

hey where are you located what kind of condition are your parts and will you take $400 and you ship?

does it come with harness, intake, distributor,? If so i will give $225 for all or $175 just for the blockand head. that is all i really want is the block,head, and the harness i really need a harness with it. but you have to ship.

hey i got a 95 z6 head almost the same as a y8 just a little bit of a power difference.

how much are you looking to spend let me know something.

i cant give pics. my hard drive crashed so i am at the library useing there computers. but trust me everything is clean that i have. any serious buyers call me in Texas at 512-754-5152