1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1991 teg alternator issues

Discussion in 'Integra' started by quickieinajiffy, Aug 9, 2009.

  1. quickieinajiffy

    quickieinajiffy New Member

    Messages:
    50
    Likes Received:
    1
    Joined:
    Jul 26, 2009
    I have a 91 integra with a b16a sirII motor in it..

    my alternator went out so i got a new one but not thinking about it, i got one for a 2000 civic si so the plugs dont match up.. i went to the junk yard and grabbed a obd2 plug off of an accord since i had seen that you can just splice the wires together..

    i went to connect the new plug to my wiring harness but i only have three wires on the harness and there are four on the plug.

    the three wires i have are: the OBD2 plug has four wires:
    blue white/green
    white/blue white/blue
    black/yellow black/yellow
    white/red

    this is confusing me because i thought 1991 tegs were obd1 which have four wires but i only have three.. so would that mean i have obd0 wires? and would i be able to still splice the obd2 plug in or do i have to get a different alternator?
     
  2. quickieinajiffy

    quickieinajiffy New Member

    Messages:
    50
    Likes Received:
    1
    Joined:
    Jul 26, 2009
    i dont know why it didnt show up but the three wires i have are:

    blue
    white/blue
    black/yellow
     
Verification:
Draft saved Draft deleted

Share This Page