1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1992 Ls-v turbo Hatch

Discussion in 'Vehicles: For Sale/Trade/Wanted' started by Sko0terMan, Aug 13, 2013.

  1. Sko0terMan

    Sko0terMan Member

    Messages:
    150
    Likes Received:
    1
    Joined:
    Jan 12, 2003
    Location:
    Los Angeles
    Hey guys im in a little bit of a bind and need to sell my hatch. Car has plenty of go fast goodies. The head is completely ported and polished, upgraded valvetrain(.5 oversized exhaust valve 1.0 oversized intake valve) JG turbo camshafts Custom JG intake manifold, 770cc RC injectors, Blox 80mm throttle body. The block is sleeved and bored out to 84mm with CP pistons and JG turbo rods. Has arp head studs, main studs, and arp rod bolts. Master Power turbo(same specs as a garrett gt35r) Ls transmission with a type r lsd. Hondata S300, Full 3" exhaust. 3" intercooler piping with front mount. I know there is a lot more that im am forgetting. hit me up if you want to know more about it. Im located in southern california. will consider serious offers
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. civicious

    civicious FüK-VTEC VIP

    Messages:
    9,855
    Likes Received:
    629
    Joined:
    Jun 15, 2003
    Location:
    Houston, TX
    I've built a few fast fast cars with MasterPower turbos, they're damn good from what I've seen firsthand.


    Sick car, wish I had the extra funds for another Honda. GLWS
     
  3. dilbeckskate

    dilbeckskate infamous

    Messages:
    3,107
    Likes Received:
    195
    Joined:
    Aug 20, 2010
    Location:
    Kennesaw Ga
  4. Sko0terMan

    Sko0terMan Member

    Messages:
    150
    Likes Received:
    1
    Joined:
    Jan 12, 2003
    Location:
    Los Angeles
    Here are the dyno numbers before the 3" exhaust and only 12 lbs of boost.
    [​IMG]
    [​IMG]
     
  5. Sko0terMan

    Sko0terMan Member

    Messages:
    150
    Likes Received:
    1
    Joined:
    Jan 12, 2003
    Location:
    Los Angeles
    I will also throw in a spare turbo(brand new)and another built b16 block. The block is sleeved and bored to 84mm. Needs to get machined again either cyl 1 or 4 has damage(valve broke at the stem) Has JG turbo rods
     
  6. Sko0terMan

    Sko0terMan Member

    Messages:
    150
    Likes Received:
    1
    Joined:
    Jan 12, 2003
    Location:
    Los Angeles
    Need to sell, make offers
     
Verification:
Draft saved Draft deleted

Share This Page