psycho.chicken
Junior Member
Selling project car...
The following is what isneeded to complete
Mount the seats (CRX SI Seats Included)
Buy a front right brake caliper and bleed the brakes
Buy / Make down pipe from exhaust manifold to the custom exhaust under the car
Your getting a 88 civic hatch in great shape
We just painted the car a nice graphite blue with some tangerine pearl
We took the black interior out of a DX and installed it in the car, complete clean interior
the motor is a B18B1
Compiled rfom a 96 B18B1 block with 46,000 iles and a B18A1 head the received the 96 cams. Head is fresh from the machine shop, had head milled and 3 angle valve job done. have paperwork will prove.
New distributor with lifetime warranty OBD0
Tranny is from a 91 Integra (5 - Speed)
Has "Phat Five" 16" Wheels and good tires
lowed a few inches
Polyeurothane Body Kit, rear bumper and Side Skirts Painted to match car
Custom Exhaust
Car does have a few minor dings we chose to paint over and not do body work.
Will need a windshield.
All the other glass is in perfect shape.
Car does start, run and rev just fine.
still throws a code 4 after new distributor (tried 2 new ones same code)
Have new ball joints, not installed.
Clutch is in great shape, maybe 10,000 miles on it.
Asking 2000 bucks, and i'm pretty firm on that.
If interested email me at psycho.chicken@comcast.net
I'll post pictures up at lunch when i can go take some.
Located in Mount Vernon WA 60 miles North of seattle
The following is what isneeded to complete
Mount the seats (CRX SI Seats Included)
Buy a front right brake caliper and bleed the brakes
Buy / Make down pipe from exhaust manifold to the custom exhaust under the car
Your getting a 88 civic hatch in great shape
We just painted the car a nice graphite blue with some tangerine pearl
We took the black interior out of a DX and installed it in the car, complete clean interior
the motor is a B18B1
Compiled rfom a 96 B18B1 block with 46,000 iles and a B18A1 head the received the 96 cams. Head is fresh from the machine shop, had head milled and 3 angle valve job done. have paperwork will prove.
New distributor with lifetime warranty OBD0
Tranny is from a 91 Integra (5 - Speed)
Has "Phat Five" 16" Wheels and good tires
lowed a few inches
Polyeurothane Body Kit, rear bumper and Side Skirts Painted to match car
Custom Exhaust
Car does have a few minor dings we chose to paint over and not do body work.
Will need a windshield.
All the other glass is in perfect shape.
Car does start, run and rev just fine.
still throws a code 4 after new distributor (tried 2 new ones same code)
Have new ball joints, not installed.
Clutch is in great shape, maybe 10,000 miles on it.
Asking 2000 bucks, and i'm pretty firm on that.
If interested email me at psycho.chicken@comcast.net
I'll post pictures up at lunch when i can go take some.
Located in Mount Vernon WA 60 miles North of seattle