The wheel patterns are the same if its a 5 lug...5x114 pattern I think, slap those puppies on!!As for the 4g63 it WILL work...if you have money to waste, but not worth it. the sohc 1.8/2.0 is mounted deferently then the turbo models. Go outside and look under the hood of your car and compare it to a picture of a 4g equiped eclipse. Your trans mission should be on the opposite side as the 4g63s', also you will notcie that one engine has the header on the front/ intake on the back.....but the other will have the header mounted near the fire wall, and the intake near the radiator. This poses a problem becuase your eingine mounting locations are directly mirrored to that of the 4gs' You would have to make or have made new chassis mounts to accomadate the 4g63s' motor mount placement. After the money you spent making the 4g63 work....you could have bought a whole 1st gen. with the turbo motor allready equiped.