dragon2003
Senior Member
well i am planning to put a 94-01 integra front end on my 89 civic and was wondering what would be needed to do this.
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by dragon2003@Apr 3 2005, 04:15 PM
well i am planning to put a 94-01 integra front end on my 89 civic and was wondering what would be needed to do this.
[post=482155]Quoted post[/post]
Originally posted by YouKnowWhoIBee@Apr 3 2005, 08:50 PM
5th gen in a crx...
a guy on civicland did it. As far as the 94 and up teg front end... i dont think it looks too bad. The rear of that car sucks. But he did make that interior pimp. I like the look of it. But if anything i would do the jdm front end. You will save money and not regret nething
[post=482248]Quoted post[/post]
Originally posted by dragon2003@Apr 3 2005, 07:34 PM
well as for the 94-01 integra front end, here is the site where i found a 4gen with an integra front end on.
http://www.cardomain.com/id/getpaid
[post=482242]Quoted post[/post]
Originally posted by ktanaka@Apr 3 2005, 10:00 PM
This is the ugliest thing I've EVER seen.
Oh wait, I just had to scroll down a bit for worse!
bahahahaa
[post=482315]Quoted post[/post]
Who cares if your car looks similar to someone else's, you can still make it nice and clean and have a very respectable car. I'd much rather see a CRX with the JDM front end than that wide-body monstrosity driving around with that ugly ass end.
I had to bring this one back from the dead to post an answer... geeze this question was asked back in 05!!
https://hondaswap.com/civic-del-sol-eg-ek/integra-front-end-swap-238402/
this thread was a big inspiration for me documenting my swap..