1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

94 civic w/b16a need good advice

Discussion in 'HYBRID -> EG-EK / DC' started by civictuner07, May 26, 2007.

  1. civictuner07

    civictuner07 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Jan 15, 2007
    Location:
    N.Y.
    i swaped a b16a into my 94 coupe, i dont know what aftermarket headers to buy, ex. 99-00 civic si or 94-01 integra, same problem with shift linkage, i had bought linkage on ebay, and they were 3-4 inches too short! and also the torque mounts on front of tranny and one that doubles as a/c bracket on the driver side. can anyone give some much needed advice, cause its depressing being so close to driving it again.


    P.S. i wanted to swap out the rear trailing arms w/ disc brakes, w/out abs but not sure from what models will bolt right in?
     
  2. 93civicracer

    93civicracer Oh, I do a little here and there.

    Messages:
    2,116
    Likes Received:
    18
    Joined:
    Apr 25, 2007
    Location:
    Texas
    Look for a hasport shit linkage and mounts is what I'd do. I'm looking at the complete b16a sir 2 changeover from hmotors with all that already included :) hopefully get it soon.
     
Verification:
Draft saved Draft deleted

Share This Page