1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

99 turbo SI FS`

Discussion in 'Vehicles: For Sale/Trade/Wanted' started by EGLSHB, Dec 15, 2003.

  1. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    That's right, the baby is for sale. I don't want to list everything the car has, but here's most of it:

    MOTOR:
    Fully resleeved Golden Eagle B18B1 block, cryotreated
    JE 9:1 forged pistons, cryotreated, polished
    Eagle H-beam rods, cryotreated
    LS Water pump, cryotreated
    GSR oil pump, cryotreated
    ARP studs top to bottom
    Basically the entire bottom end was cryo'd
    Integra Type R flywheel, lightened and cryotreated
    Action dual diaphragm 3200lb pressure plate, cryo'd
    Cerametallic 6 puck clutch disc, cryo'd

    Stock B16A2 head, stock Civic Si cams

    Full Custom Polk Performance turbo kit to include:
    Turbonetics T3/T04E .54 trim stage 3 turbo
    Turbonetics Deltagate MKIV wastegate (vented to atmosphere)
    Spearco intercooler, custom sized to car (HUGE)
    2.5 inch downpipe, transition into 3" Thermal turbo cat-back
    Turbonetics rally style BOV
    2.5 inch turbo piping, painted gunmetal
    550cc injectors, may have 720cc injectors on it soon
    Drag Inconel steel turbo manifold
    TurboXS manual boost controller, set to 14psi currently

    Hondata Stage 3b standalone engine management system:
    3 stage rev limiter, to include launch limiter, full throttle shift, and redline limiter..all programmable to exactly where you want them;
    Shift light integrated into dash, fully adjustable
    VTEC crossover control, wherever you want it
    Fully customizeable fuel and ignition maps for ANY setup

    Exterior
    Full complete Tsunami body kit, to include front, rear, and sides
    Dual Halo black housing projector headlights
    Rota 16" C8's, in gunmetal
    NO badging or stickers, except one single "H" emblem on trunk
    Car was sanded down to metal/primer and repainted a custom black pearl, then wetsanded to smooth perfection..smooth as glass.

    Interior:
    Autometer boost, EGT, Oil Pressure, Water temp gauges
    Autometer dual gauge bezel mount
    Kenwood Excelon KDC-X959 HU, plays MP3/WMA files
    Custom Subwoofer box w/ Si logo flush mounted in trunk
    One 10" Polk Audio MOMO speaker
    Jensen 500W amp w/ remote bass gain

    I'm sure there's more, but that's just the beginning in a nutshell. Right now the car has 82,000 on the odometer, and 5500 on the motor. Car is excellent mechanically, and dyno'd at 341FWHP and 240lb/ft of torque on 11/13/03 at Polk Performance on 14psi and pump gas. Transmission is original Civic Si tranny with super short gearing for excellent acceleration. Currently needs a new Carbon fiber hood and a good detailing which I don't have time for. Was asking $20k, but now at a reduced $14,500 priced to sell quick. Pictures coming soon...

    PICS: My Domain expired for my server, but here's a couple pics to start with...

    Close up of the sleeve work, the o-ringed deck, pistons, and ARP studs
    [​IMG]
    Pressure plate, clutch, and Type R flywheel..
    [​IMG]
    Another shot of the deck of the motor...notice the reflection of the digital camera on the polished pistons.
    [​IMG]
    Rear quarter..
    [​IMG]
    Side shot
    [​IMG]
    Engine bay
    [​IMG]
    Front shot...before the new dual halo projector lights. A rock took out the old ones
    [​IMG]
     
  2. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    Even more pics.. I have hundreds, literally.

    Most recent shot (last week) of the car..
    [​IMG]

    And a better angle on the manifold/turbo..
    [​IMG]

    Pic of the custom box...bad quality pic, but it shows the raised "Si" logo..
    [​IMG]

    And a pic of the instrument cluster, w/ the boost and EGT gauges..
    [​IMG]

    Email Tech@import-driven.com if interested
     
  3. swanny

    swanny Senior Member

    Messages:
    3,779
    Likes Received:
    1
    Joined:
    Jul 13, 2003
    Location:
    buck teeth and government checks, PA
    dizammmn tizzzite rizide
     
  4. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    and chizzeap......... if you know anyone wanting it..... $13,700
     
  5. swanny

    swanny Senior Member

    Messages:
    3,779
    Likes Received:
    1
    Joined:
    Jul 13, 2003
    Location:
    buck teeth and government checks, PA
    wtf is croy'd by the way? where you located?
     
  6. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    cryogenically treated.... it is said to increase the tensile strength of some metal;s up to 700%

    arkansas
     
  7. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    This motor is only sitting at half of it's potential, boost wise, and on a very safe tune at the moment. I've been told by Polk Performance that 370+fwhp is possible on pump gas, with over 500whp possible on race gas.
     
  8. h22bubbleback

    h22bubbleback Senior Member

    Messages:
    1,559
    Likes Received:
    0
    Joined:
    Jul 18, 2003
    Location:
    North Jerzey
    sweet..y so cheap? u should have no problems getting more if u wanted
     
  9. dcsports413

    dcsports413 Senior Member

    Messages:
    276
    Likes Received:
    0
    Joined:
    May 4, 2003
    wow, very nice car! Why are you selling it?

    Very good price also, almost too good...$13700?
     
  10. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    been trying for a couple weeks... and i have a payment due that i DO NOT want to pay..

    if i sell it at that price, i can become completely debt-free, and have the money to complete my SR20 swap, and start on my drag CRX...

    I wish you guys could hear the Sub system in this car....

    also, i have done NO weight reduction, you can still drive this car as comfortably as the day it was built, with the exception of having to buy front tires more often...
     
  11. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
  12. MaliWho97

    MaliWho97 Senior Member

    Messages:
    568
    Likes Received:
    0
    Joined:
    Jan 16, 2003
    Phuck, I'm in Rogers, Ar, I'm calling my bank tomorrow! Haha
     
  13. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    lemme know mali.... it can be seen in jacksonville...
     
  14. BigJ

    BigJ I'm just about that action Boss. VIP

    Messages:
    11,090
    Likes Received:
    408
    Joined:
    Oct 4, 2002
    Location:
    Washington
    Damn, Free bump for what seems a bad ass ride. Has thelooks, and has tons of go.
     
  15. EGLSHB

    EGLSHB Senior Member

    Messages:
    396
    Likes Received:
    0
    Joined:
    Dec 27, 2002
    due to a non-paying bidder... on ebay... it is for sale again...

    first person with $11,000 gets it... you can still borrow that much on it...
     
  16. drag on

    drag on Junior Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Feb 21, 2003
    where you live? and whats a healthy redline on a motor lik ethat?
     
  17. 90 accord

    90 accord Chicks dig the box Moderator VIP

    Messages:
    5,008
    Likes Received:
    21
    Joined:
    Sep 29, 2002
    Location:
    Mesa, AZ
    you should trade me tail lights ;)
     
  18. jamesA

    jamesA Well known pissed off telephone guy VIP

    Messages:
    16,118
    Likes Received:
    1,016
    Joined:
    Aug 10, 2003
    Bad ass Si man...got any time slips of waht it runs?

    btw... what the hell happened to your temp gauge needle? <_<

    [​IMG]
     
Verification:
Draft saved Draft deleted

Share This Page