1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Acura Vigor, and early Legend with Longitudinal mounted engines...

Discussion in 'NSX, TSX, RL, TL, CL' started by genericJDMnonsense, Sep 27, 2008.

  1. genericJDMnonsense

    genericJDMnonsense New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Sep 27, 2008
    Anyone know if an S2000 transmission would work with either of these cars to convert them to RWD? I know you would have to do copious amounts of money spending, fabricating and hammering away at the tunnel to make this work, but do these engine and transmission combos spin in the same direction?

    Also wondering, since s2000 f22c is more like a K series, would it work in a FF configuration with a K series trans? or what about using a vigor/legend longitudinal FF manual trans with s2000 engine for other applications? I understand this is all costly and not practical, but I've never heard of anyone doing it.
     
  2. eg6sir

    eg6sir Supa Mod Moderator VIP

    Messages:
    21,703
    Likes Received:
    321
    Joined:
    Aug 17, 2005
    Location:
    661 BK CA
    do it and let us know how it turns out
     
  3. K2e2vin

    K2e2vin Senior Member

    Messages:
    8,446
    Likes Received:
    92
    Joined:
    Jan 2, 2003
    Location:
    Raleigh, NC
    I believe they do spin in the same direction; clockwise.

    No, not without modifications. Prototype Racing tried with the F20C and figure the K20A was just as good if not better so why bother.

    Vigor/Legend transmissions are probably geared long. In addition to that, the F20/22C would probably too weak to drive whatever car the engine/transmission is in due to the gear ratios.
     
Verification:
Draft saved Draft deleted

Share This Page