1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Auto to manual help

Discussion in 'Civic and del Sol - EG and EK' started by delsolcharlie, Apr 23, 2007.

  1. delsolcharlie

    delsolcharlie New Member

    Messages:
    226
    Likes Received:
    1
    Joined:
    Mar 13, 2007
    Location:
    Augusta< GA
    okie dokie...lets see my progress

    clutch pedals installed
    clutch master cylinder installed
    hydruallic lines ran
    auto transmission is outta there

    now can i use the AT bolts from the flexplate on my new flywheel??
    is there any new bolts i need??
    what is all the tricks to get a clutch switch and making the car think it is in neutral so i can take my keys out and all that other good stuff
     
  2. supwhoaday

    supwhoaday New Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Apr 25, 2007
    there is a sensor on the ignition. just unscrew it!! yes you can use the bolts from the flexplate to mount the flywheel.you will need the bolts to mount the pressure plate to the flywheel!!!!
     
Verification:
Draft saved Draft deleted

Share This Page