1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Auto to Manual Swap Mounts for 93 Civic Coupe

Discussion in 'Civic and del Sol - EG and EK' started by EJ2 civic, Jan 13, 2008.

  1. EJ2 civic

    EJ2 civic New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    Hey guys, I wanted to get this cleared up. I will be getting a b16a2 swap soon for my 93 civic coupe (EJ2) and exactly which mounts do I need. I have researched and heard contradictory replies. Some say any 94+ Integra mounts will work. Also, will the auto transmission mount and location line up with the manual b16 tranny? Or will I need this mount from another generation Civic or Integra, get fabricated mounts? Or the one I will try to avoid, weld/ drill a new location for the mount to line up. Please help. Thanks in advance.

    P.S: Is it safe to say that the engine bay area/ dimension in the EG's are exactly the same as in the EJ2?
     
  2. get0nslimslevel

    get0nslimslevel DA BUSINESS AUTO CLUB

    Messages:
    13
    Likes Received:
    0
    Joined:
    May 19, 2007
    Location:
    PA
    Jus My 2 Cents

    Tranny Mount You Could Buy A Auto To Manual Mount From Hasport Or Rig It With Washers So It Would Si Sort Of Right Or Your Third Option Is To Drill The Weld Spots Re Weld Mount Bracket... All 3 Have Been Done By Most Of My Friends Mos Effective Is The Mount U Get What U Pay For
     
  3. pcupo12

    pcupo12 New Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Oct 31, 2006
    ^Thats what I did. I just got the hasport mount. Wasnt TOO expensive. Looks pretty sweet too.
     
Verification:
Draft saved Draft deleted

Share This Page