1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B16 Swap Need Help

Discussion in 'HYBRID -> ED-EF / DA' started by vdubber, Jun 14, 2003.

  1. vdubber

    vdubber Member

    Messages:
    48
    Likes Received:
    0
    Joined:
    Apr 4, 2003
    my motor came with plugs, half a wiring harness. the harness has pretty much everything up to the fuse box and all those plugs, plus came with a injector resistor box already attached to the engine with all the plugs and wires. my ? is can i use this harnes or do i have to chop it off and use my dx harness,chop that to hell and use the b16 plugs, or can i use the dx plugs. i freakin hate wiring it sux ass. help me pleaz before i screw something up.
     
  2. Uppertorso

    Uppertorso Senior Member

    Messages:
    106
    Likes Received:
    0
    Joined:
    Apr 8, 2003
    Location:
    Winnipeg, Manitoba
    i found it easier to use the DX harness and add the wires that you need, here is a good reference on this site that helped me

    http://www.hondaswap.com/articles/viewer.php?id=7

    also check out hasport.com
    for pin locations, and wiring info, that helped me alot also

    i found if you take your time, and do one wire at a time, it is a piece of cake, it should only take 2-3 hours
    if your drunk.

    lol

    good luck
    ;)
     
  3. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    If you posted in the right forum, and you have a pre 92 aka 88-91, you need to convert your wiring to MPFI, before you can do a swap.
     
Verification:
Draft saved Draft deleted

Share This Page