1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16a hose question

Discussion in 'HYBRID -> ED-EF / DA' started by simplico17, Sep 9, 2003.

  1. simplico17

    simplico17 Member

    Messages:
    32
    Likes Received:
    0
    Joined:
    Mar 14, 2003
    I swapped a b16a into my 91 crx hf and there are two hoses that come out of either side of the speedo cable on the tranny. One hose looks like a heater hose and the other looks like it may be a vacuum hose. I have looked at the shop manual for the b16 but there is no reference for these hoses. I was wondering if anyone can tell me what these hoses are. I just plugged them off so i could start up the motor, but i want to know what the hoses are for. ANy help would be appreciated. :worthy:
     
  2. Slo86GT

    Slo86GT Super Moderator

    Messages:
    3,354
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Memphis - Hellhole of the South
    Take that VSS out of the transmission, and put the one from the CRX tranny in the hole. It fits perfectly., and no more extra hoses!

    Those were for a pump for a power steering system that changed pressures with speed. Ingenious, but not needed in our cars! :)
     
  3. simplico17

    simplico17 Member

    Messages:
    32
    Likes Received:
    0
    Joined:
    Mar 14, 2003
    Thanks a lot, yeah i already had the vss hooked up. I just had no idea what the hsoes were for. Thanks a lot again :worthy:
     
Verification:
Draft saved Draft deleted

Share This Page