B16A Questions

We may earn a small commission from affiliate links and paid advertisements. Terms

I

illmatik

Senior Member
Ok Will a B16A First Gen wit CTR Cams work with a Hydro Tranny and OBD-1 ECU? or will there be conflicts?
John
 
Originally posted by brc80@Nov 26 2003, 07:58 AM
They will work with no problems.
Click to expand...

Um, if he use's OBD 0 IM with OBD 0 electronics and is trying to plug it into a OBD I car, there is going to be issues.
 
Originally posted by brc80@Nov 26 2003, 08:12 AM
Please explain?
Click to expand...

OBD 0 electronics on the motor don't plug into a OBD I wiring harness. But it's all ok because he has a 90 teg, so there is no issue :)
 
Originally posted by illmatik@Nov 26 2003, 12:11 PM
i have a 92 civic hb dx.. will there be hella probs?
Click to expand...

I did a b16a2 swap into my 93 DX, it wasn't to bad. The hatch was an auto, so I had to cut out and install a new passenger side motor mount, install clutch pedals, etc. I wired it OBD1, bought new injectors, dizzy, and chipped P28. It took a month to do the swap, but I didn't work on it every chance I could have.
 
Originally posted by illmatik@Nov 26 2003, 01:11 PM
i have a 92 civic hb dx.. will there be hella probs?
Click to expand...

Didn't you tell me in an IM that you has a 90 teg?
 
just save up some money and get a obd1 b16a and save yourself the hassle of F'ing with all the wiring probs
then it comes with the hydro tranny anyway, it's a newer engine, it hase more horsepower to start with

ctr cams are a good cheap way to gain some performance
 
You must log in or register to reply here.
Back
Top