1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18 w/gsr internals B16 head and t3/t4 turbo help

Discussion in 'HYBRID -> ED-EF / DA' started by jasontyrone, May 13, 2007.

  1. jasontyrone

    jasontyrone New Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    May 13, 2007
    Location:
    San Diego/Ramona, CA
    I just got this motor out of a integ. I'm going to put it into my 90 CRX DX the motor is OBD0 as is my crx. it did not come with the ECU so what ECU do I need having a turbo and all does it need to be a custom ECU? any info on how to install this motor into my CRX whould help. I still need axels and shift linkage what type? This is my frist ever swap and frist ever turboed motor. I'm a little over my head here any help would be great.

    Thanks,
    Jason
     
  2. badasscrx

    badasscrx New Member

    Messages:
    292
    Likes Received:
    0
    Joined:
    Mar 29, 2007
    Location:
    Casper. Wy
    i dont know about the ecu but if you go on ebay and look at crx mount, crx shift linkage, and crx axles, and you'll need the half shalf that bolts to the motor if you dont have that already
     
Verification:
Draft saved Draft deleted

Share This Page