1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18a in EG axle question

Discussion in 'HYBRID -> EG-EK / DC' started by ttboostboy, Nov 12, 2006.

  1. ttboostboy

    ttboostboy New Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Oct 15, 2006
    iI couldnt really find anything conclusive so heres my question. I have a 93 B18a and i have a 95 gsr trans. Its going into an EG. I have axles off of the EF that had the motor before my car did. Can i use the cable trannys axles on a GSR trans or do i need new axles? or is there some way to possibly change out the halfshaft?
     
  2. EG6Civic83

    EG6Civic83 New Member

    Messages:
    118
    Likes Received:
    0
    Joined:
    Aug 12, 2006
    You are going to need new axles. Get the ones for a GSR transmision. I have those in my car, they will fit your hubs and your S80 transmission. Actually you should be able to use axles from any B series with the exception of the Type R and CRV axles with your EG as those axles require bigger hubs (36mm) I believe.
     
Verification:
Draft saved Draft deleted

Share This Page