1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18a to b18b

Discussion in 'HYBRID -> ED-EF / DA' started by londoncrx, Mar 27, 2009.

  1. londoncrx

    londoncrx New Member

    Messages:
    67
    Likes Received:
    0
    Joined:
    Mar 1, 2009
    im switchin over from a b18a1 to b1 but on the a1 theres 2 places for wires to hhok up but there not there on the b1 what do i do
     
  2. D16SiHatch

    D16SiHatch New Member

    Messages:
    1,297
    Likes Received:
    44
    Joined:
    Sep 7, 2007
    seriously, could you be any more vague? luckily i still know what it is you are asking about. the 2 wires on the back of the block are for the coolant fan switch, and it tells the radiator fan to kick on. the b1 has this 2 prong connector located on the thermostat housing. you need to move/extend these wires from the back of the block, over to the new location. if you don't your rad. fan will never kick on.
     
Verification:
Draft saved Draft deleted

Share This Page