1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18a1 into 89 civic si swap questions

Discussion in 'HYBRID -> ED-EF / DA' started by onevilefcker, Mar 3, 2007.

  1. onevilefcker

    onevilefcker 89 civic owner

    Messages:
    4
    Likes Received:
    0
    Joined:
    Mar 3, 2007
    Location:
    cleveland oh
    alright i have an 89 civic si hatch and
    i also have a 1990 integra engine and transmission,
    this is what i know i need,
    b-swap linkage
    b swap mounts,
    ecu- from 90 or 91 obd0
    im preety sure i need the mt integra cv's,
    can i use the wiring harness in there?
    will it plug into the new ecu?
    do i have to do any additional wiring
    and if so what.
    thanks,
     
  2. skillz2k5

    skillz2k5 Senior Member

    Messages:
    499
    Likes Received:
    0
    Joined:
    Mar 7, 2005
    Location:
    BFE
    We did the same swap in an 88 dx but we went from auto to manual so I couldn't tell you specifics about the shift linkage but you will have to order something custom I believe. We ended up getting after market linkage and solid mounts. Also it's a pretty tight fit so you will have to beat in the frame where the crank pulley will be located. Other than that your wiring should be pretty straight forward since it's already mpfi. In fact you shouldn't have to do any wiring but dont quote me on it.
     
  3. ef9davejdm

    ef9davejdm New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Mar 20, 2007
    Location:
    Norcal2Socal
    its all custom work not too hard just search forums becuase its 125 am and im not explaining :) lol mounts should cost prolley like 300 but search some place try and con you linkage easy on the car
     
Verification:
Draft saved Draft deleted

Share This Page