1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18a1 swap

Discussion in 'General Tech and Maintenance' started by lickety_slickjj, Nov 10, 2005.

  1. lickety_slickjj

    lickety_slickjj Junior Member

    Messages:
    50
    Likes Received:
    0
    Joined:
    Nov 10, 2005
    i am swapping a b18a1 into my 91 civic dx, it allready has a zc motor in it. i need to know if i need to get different shift linkages, can i use the stock motor mounts from the b18a1? and can i use the shift linkage from a 90 or 91 integra? and will my wiring harness work? i believe i should have an obd0 harness right now.
    please help me.
     
  2. D See 2

    D See 2 Senior Member

    Messages:
    2,405
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Baltimore, MD
    Since you have a ZC which is MPFI already, you can just use that harness.

    You need aftermarket motor mounts i.e. Hasport, HCP, etc.... There are no combination of stock mounts that let you put that motor in your car.

    You can use the integra linkage, but it needs to be modified. Lengthened or shortened. I forgot which. OR you can buy linkage with your mounts from hasport or something.
     
  3. lickety_slickjj

    lickety_slickjj Junior Member

    Messages:
    50
    Likes Received:
    0
    Joined:
    Nov 10, 2005
    thank-you, so do i use the ecu from a 90 or 91 integra?
     
Verification:
Draft saved Draft deleted

Share This Page