1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18C Ignitor compatibility

Discussion in 'ECU's, Electronics, and Tuning' started by B-SERIES_BOY, Feb 27, 2004.

  1. B-SERIES_BOY

    B-SERIES_BOY Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Oct 3, 2002
    Location:
    new jersey
    I have an obd1 b18c with a bad ignitor. Do any other obd1 ignitors (integra LS or 1.5/1.6 honda) work, or is it specific for the b18c? Thanks...
     
  2. radnulb

    radnulb Senior Member

    Messages:
    674
    Likes Received:
    1
    Joined:
    Sep 23, 2003
    Location:
    Sinsinnaty, Ohio
    any OBD1 or OBD2.
    if you have a MSD, Crane, etc. spark box you can bypass the ignitor totally.
     
  3. B-SERIES_BOY

    B-SERIES_BOY Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Oct 3, 2002
    Location:
    new jersey
    Thanks for the info...I have some spare parts still laying around from my d15/d16's and wasn't sure if the ignitor would work in the b18c and I was kinda nervous about just trying to plug it in. On another note, I didn't know you could bypass the igniter/ICM with an aftermarket ignition. Well, thanks again for the help.
     
  4. radnulb

    radnulb Senior Member

    Messages:
    674
    Likes Received:
    1
    Joined:
    Sep 23, 2003
    Location:
    Sinsinnaty, Ohio
Verification:
Draft saved Draft deleted

Share This Page