B18c4 into civic 1.6Ls coupe help

[Shyfxfx]

I have a 1997 1.6ls civic coupe which i plan to put a b18c4 in i will be collecting a mb6 as the donor tonight.
Will this be a str8 swap meaning take the whole engine, box, shafts, front hubs, engine and box mounts, loom, ecu and key barrel out of the mb6 or will any alterations need to be made to the loom or any different mounts etc be needed. I have limited acces to internet just my iphone so searching for this info ona small screen with slow internet is proving very anoying.

 

[Shyfxfx]

Ok sofar i have managed to find out that i will need to use also the dash loom out of the mb6 as mine does not suport vtec and that i will possibly need gearbox and rear engine mounts off a ek4 vti as the mb6 ones wont fit into my car.
Are these two peices of info correct and if not could some one PLZ help me with my original questions or point me in the right direction. would like to make a start on this asap!