1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CELs not on. HELP.

Discussion in 'HYBRID -> BA-BB /CA-CD' started by mikeislord, Nov 15, 2005.

  1. mikeislord

    mikeislord Senior Member

    Messages:
    148
    Likes Received:
    0
    Joined:
    Sep 15, 2005
    Location:
    Piscataway, NJ
    Thought it would be a funny title. Got a engine harness from the junkyard, wrapped it around the H22, lengthened the wires needed to be lengthened. Jumped the thick Blk/Yel to the Thick Yel on the distributor. Didnt hook up my VTEC or my o2 sensor. So, when I went to start the car, it should have had a CEL but it didnt. In fact, the CEL didnt even come on to do a system check, car turns but doesnt start. To my best knowledge, I have every fucking thing plugged in, I really need help on this one. What could be wrong with my wiring? I did switch A6 with A11 at the ECU because I have a 94. Anything?
     
  2. swanny

    swanny Senior Member

    Messages:
    3,779
    Likes Received:
    1
    Joined:
    Jul 13, 2003
    Location:
    buck teeth and government checks, PA
    grounds?
     
  3. mikeislord

    mikeislord Senior Member

    Messages:
    148
    Likes Received:
    0
    Joined:
    Sep 15, 2005
    Location:
    Piscataway, NJ

    If I missed a ground, it could cause my service check to completely not function?! I guess it is possible I could have missed one but I doubt it. Anything else it could be maybe before I jump back in there tomorrow?
     
  4. mikeislord

    mikeislord Senior Member

    Messages:
    148
    Likes Received:
    0
    Joined:
    Sep 15, 2005
    Location:
    Piscataway, NJ
    Bingo. Found the ground, attached it, and it started like a dream. Thanks alot.
     
Verification:
Draft saved Draft deleted

Share This Page