1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Clutch goes almost to the floor with no engagement!

Discussion in 'Integra' started by shorelovr202, Apr 28, 2009.

  1. shorelovr202

    shorelovr202 Integra Guy

    Messages:
    61
    Likes Received:
    1
    Joined:
    Nov 22, 2008
    Location:
    Latrobe, PA
    Yesterday I was driving and my clutch slowly began to get looser and looser. When I press down on it, it actually will stay halfway to the floor unless I pull it back up with my toes. It will barely engage, its only gving me maybe an inch off the floor that it will grab if it decides to. Half the time, it won't grip at all. Could it be the line, the disk, or do I need a whole kit completely. Only mod I have is an intake right now. Any ideas? I've never had a clutch go on me, or drivin anything with a dead clutch in it. Is it screwed?:confused:
     
  2. chestercheeto48

    chestercheeto48 Senior Member VIP

    Messages:
    1,704
    Likes Received:
    57
    Joined:
    Nov 12, 2002
    Location:
    madison, WI
    Could be the clutch master/slave cylinder. Kinda sounds like what happened to me when mine went out.
     
  3. shorelovr202

    shorelovr202 Integra Guy

    Messages:
    61
    Likes Received:
    1
    Joined:
    Nov 22, 2008
    Location:
    Latrobe, PA
    master cylinder? I'm not having brake problems.... I'm having clutch problems. Master cylinder is for brakes correct? What could it have to do with what I described??????
     
  4. shorelovr202

    shorelovr202 Integra Guy

    Messages:
    61
    Likes Received:
    1
    Joined:
    Nov 22, 2008
    Location:
    Latrobe, PA
    Nope, you called it... thats what it was. My shit was leaking under my dash right where the pedal connected. A first for me. Good call brother. Saved my wallet. Thanks.
     
Verification:
Draft saved Draft deleted

Share This Page